View Issue Details

IDProjectCategoryView StatusLast Update
0002276SpeedFanFan controlpublic2014-09-02 10:07
ReporterJodo1 Assigned Toalfredo  
PrioritynormalSeveritymajorReproducibilityalways
Status acknowledgedResolutionopen 
OSWindowsOS Version8.1 
Product Version4.49 
Summary0002276: No fan control on Gigabyte Z97x-SLI MB
DescriptionMotherboard fan speeds and fan control not showing in Speedfan 4.49. GPU, CPU, 2 other temperature sensors are recognized along with CPU thread and utilization information. All other functions other than fan control work.
Steps To ReproduceLaunch Speedfan
Left and Bottom controls for Fan speeds and setting are blank.
TagsNo tags attached.
Motherboard ModelGigabyte Z97x-SLI
Video Card ModelGTX 670

Activities

Jodo1

2014-07-22 19:16

reporter   ~0007414

Also CPU temps using an Intel i7-4790k are not accurate. Temps show roughly 10-20 degrees vs Hardware Monitor showing 28-40 which is more likely. I sent off a report last night.

alfredo

2014-08-08 20:14

manager   ~0007426

Can you send me a report using the latest SpeedFan beta?

Jodo1

2014-08-12 07:47

reporter   ~0007452

Report sent using 4.50 Beta 2. Same problem exists in the beta. Unable to gather DIMM info either, but that might be normal for this board.

alfredo

2014-08-12 09:46

manager   ~0007453

You have mail :-)

Jodo1

2014-08-13 07:21

reporter   ~0007458

I did not appear to receive any mail. I checked my Junk folder. I received notification of my own update to this ticket, but not your update at 9:46 nor any private mail. Could you please resend.

alfredo

2014-08-13 10:02

manager   ~0007463

Resent :-)

alfredo

2014-08-13 10:05

manager   ~0007464

I checked my mail server and both emails where properly delivered to gmail servers. Today's one:

Aug 13 09:54:27 myserver postfix/smtp[26764]: 2C3824E008D: to=<???@gmail.com>, relay=gmail-smtp-in.l.google.com[173.194.66.27]:25, delay=2.4, delays=0.11/0.07/0.58/1.6, dsn=2.0.0, status=sent (250 2.0.0 OK 1407916467 br15si1597255wib.83 - gsmtp)

Jodo1

2014-08-14 07:15

reporter   ~0007476

New Report Sent.

Temp2 shows 127 degrees constant(this was not an issue before)
CPU temps appear more accurate
PWM1,2,3 controls show however they start at 0% and do not affect speed when adjusted. Fan1 showing very high RPM(0000010:0000046-5400RPM) when it should be more like 0000593:0001800 or so at 100%

Thanks for your efforts so far!

Jodo1

2014-08-14 09:47

reporter   ~0007478

New Report Sent.

Temp2 still shows 127 but that has been determined to be normal due to MB not using it.
CPU Temps are still accurate
PWM1,2,3 controls are still not working as expected. Start at 0%
Fan1 speed is 2x higher than expected.

Thanks again!

Jodo1

2014-08-15 07:04

reporter   ~0007482

New Report Sent.

Fan1 speed is now accurate
PWM1,2,3 controls still not working as expected. Start at 0%, no change in fan speed when adjusted.

Thanks!

Spinaker

2014-09-02 10:07

reporter   ~0007571

Same problem. Speedfan 4.50

Issue History

Date Modified Username Field Change
2014-07-21 23:22 Jodo1 New Issue
2014-07-21 23:22 Jodo1 Status new => assigned
2014-07-21 23:22 Jodo1 Assigned To => alfredo
2014-07-22 19:16 Jodo1 Note Added: 0007414
2014-08-08 20:14 alfredo Note Added: 0007426
2014-08-08 20:14 alfredo Status assigned => acknowledged
2014-08-08 20:14 alfredo Description Updated
2014-08-08 20:14 alfredo Steps to Reproduce Updated
2014-08-12 07:47 Jodo1 Note Added: 0007452
2014-08-12 09:46 alfredo Note Added: 0007453
2014-08-13 07:21 Jodo1 Note Added: 0007458
2014-08-13 10:02 alfredo Note Added: 0007463
2014-08-13 10:05 alfredo Note Added: 0007464
2014-08-14 07:15 Jodo1 Note Added: 0007476
2014-08-14 09:47 Jodo1 Note Added: 0007478
2014-08-15 07:04 Jodo1 Note Added: 0007482
2014-09-02 10:07 Spinaker Note Added: 0007571