View Issue Details
|0002123: Speedfan incorrectly switches to smartguardian after wakeup
|There are fans controlled by PWM1 and PWM3 on the IT8721f at $290 on ISA. The conrol only works properly with PWM "Software Controlled" mode. This consistently works fine at system startup, or if I exit and restart SF. However, after the system goes into S3 sleep and wakes up, the modes somehow change to SmartGuardian mode, which doesn't work. I have to manually reset them.
Last time (the only time) I let SF try to do the automated crawl to gather system info, it crashed my system, so I don't have that kind of fine.
|No tags attached.
|Asus M5A99FX Pro R2.0
|Video Card Model
|ATI Radeon 7750
|Two other things: Even when the fan control is in the bogus state, exiting and restarting SF reset is. Also, some or maybe all the time when I come out of sleep, the GPU temp is set to -99 degrees.
Please refer to thread 0001952 for the GPU issue.
About the SmartGuardian issue, are you using any other software similar to SpeedFan? SpeedFan, if instructed to do so in CONFIGURE / ADVANCED, set the PWM MODE to the value you chose. If you find it in a different state, most likely some other software changes it right after SpeedFan applied the change.
|No, there is nothing at all that I know of that is installed and would be looking at the PWM values or similar. Also, it only ever happens coming out of sleep mode.
|new => assigned
|Note Added: 0007225
|Note Added: 0007235
|assigned => acknowledged
|Note Added: 0007239