View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0000979 | SpeedFan | Fan control | public | 2007-09-23 04:13 | 2007-09-23 22:26 |
| Reporter | Veen | Assigned To | alfredo | ||
| Priority | normal | Severity | tweak | Reproducibility | always |
| Status | acknowledged | Resolution | open | ||
| OS | Windows XP | OS Version | Pro 32-Bit | ||
| Product Version | 4.33 | ||||
| Summary | 0000979: MSI-6702 / MSI K8T NEO: Not all fans showing up. | ||||
| Description | On this board, there appear to be five fan connections, all of which I have in use and are currently operating fans. One seems to be a dedicated CPU fan connection, one seems to be a dedicated case fan connection, and the other three look to be generic. Fan1 and Fan2 are pulled from Winbond W83697HF, but I can not find where the other three fan controllers are at. They are all standard three pin controllers, and all of them operate the fans hooked up to them flawlessly and without issue. They must be here somewhere. | ||||
| Steps To Reproduce | 1: Use MSI K8T NEO motherboard. 2: Install Speedfan and let it autodetect what is there. 3: Only Fan1 and Fan2 will come up, regardless of however many other fans are connected or not connected. | ||||
| Additional Information | No user created presets for this board have these extra fans, either. I just want the fan speeds to show up, I don't even care if I can control their speeds or not, I leave them all at 100% speed all the time anyway. | ||||
| Tags | No tags attached. | ||||
| Motherboard Model | |||||
| Video Card Model | |||||
|
|
How many fan speeds (even if at 0 RPM) are shown? Did you enter CONFIGURE / ADVANCED and select a higher FAN DIVISOR? |
|
|
2 fan speeds are showing. One of them is the CPU fan's input, and the other is a generic fan input that I have tested with a case fan, and the power supply's intake fan. Both ports report correctly, but that still leaves three unaccounted for. In Configure/Advanced, there is only a listing for Fan1 and Fan2's divisor, and changing that around does nothing. I also did not touch it before this issue, and only changed it around and then back to the original setting of "8" a few minutes ago. Edit: I'm sorry, I apparently failed 1st grade. There are four total fans on the motherboard, two of which are showing up. There's still two missing fans, not three. |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2007-09-23 04:13 | Veen | New Issue | |
| 2007-09-23 04:13 | Veen | Status | new => assigned |
| 2007-09-23 04:13 | Veen | Assigned To | => alfredo |
| 2007-09-23 13:34 | alfredo | Note Added: 0002948 | |
| 2007-09-23 13:34 | alfredo | Status | assigned => acknowledged |
| 2007-09-23 22:26 | Veen | Note Added: 0002952 | |
| 2007-09-24 07:48 | Veen | Note Edited: 0002952 |
