View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0000786 | SpeedFan | Fan control | public | 2007-02-09 22:52 | 2007-02-09 23:29 |
| Reporter | DeadMan | Assigned To | alfredo | ||
| Priority | normal | Severity | major | Reproducibility | always |
| Status | assigned | Resolution | open | ||
| Platform | Asus P5N-E SLI | OS | XP Pro | OS Version | SP2 |
| Summary | 0000786: Fan control refuses to lower fan speed after initial speedup | ||||
| Description | If I set my min speed to 25% (The lowest the CPU fan will go) and max speed to anything from 25% to 100% the speed stays EXACTLY the same as the max speed and NEVER drops speed. If I manually set the speed to 25% then run Orthos to simulate CPU load the speed increased in increments until it reaches the max speed or 100% speed if it reaches the warning temp. If I stop CPU load before it gets to the warning temp it continues too rise in speed percentage a short while after and then STAYS STUCK at that speed percentage. It never falls back to the min percentage. Q-Fan and Chassi Fan are 'OFF' in the BIOS as is Intel Speed Step. I have these settings for the CPU fan. Desired temp 35c warning temp 50c Min speed 25% Max speed 100% Delta value 2 Set speed to 100% on exit unchecked SMBus disabled Advanced set to IT8712F Temp sensor diode 1=Thermistor Fan 1 divisor =8 PWM modes all set to software controlled PWMOUT clock 3M Temp offsets 0 FAN1 mult = 1 FAN1 div = 1 All reverse PWM are off Thermistor divisor set at 8 | ||||
| Steps To Reproduce | As above. | ||||
| Tags | No tags attached. | ||||
| Motherboard Model | |||||
| Video Card Model | Asus 7600GT Silent HSF's | ||||
