View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0000459 | SpeedFan | Fan control | public | 2006-01-28 02:42 | 2006-02-10 09:46 |
| Reporter | thedragonmaster | Assigned To | alfredo | ||
| Priority | normal | Severity | minor | Reproducibility | always |
| Status | acknowledged | Resolution | open | ||
| Platform | PC | OS | windows | OS Version | xp |
| Product Version | 4.27 | ||||
| Summary | 0000459: fan rpm's 0 | ||||
| Description | with the realase of this version of speed fan, speedfan no longer reports fan rpm's. i am not 100% sure of my motherboard make/model. the pc is an hp pavilion 533w and they say the motherboard is a "Trigem GL VE 2002052" fan sensore "LPC47M192 at $600 on ISA" i saw a similare issue on here and tryd to raise the fan divisore from 1. i got to 10 and chickend out thinking it would cause damage. | ||||
| Tags | No tags attached. | ||||
| Motherboard Model | |||||
| Video Card Model | onboard | ||||
|
|
i figured the info from speed fans startup might help. Win9x:NO 64Bit:NO GiveIO:YES SpeedFan:YES I/O properly initialized Linked ISA BUS at $0290 Linked Intel 82801DB ICH4 SMBUS at $1880 Scanning ISA BUS at $0290... SuperIO Chip=LPC47m192 (PLEASE REPORT) Sensor's Base Address : $0600 Scanning Intel SMBus at $1880... SMSC H/M Block (ID=$20) found on SMBus at $2D SMART Enabled for drive 0 Found WDC WD1200JB-00GVA0 (120.0GB) End of detection Error loading event --> CfgVersion=01.0001 EventsVersion=01.0001 Loaded 0 events |
|
|
Make sure you changed FAN DIVISOR and not FAN DIV. Try with 8. |
|
|
ok, i suddenly feel quight ignorant, where exactly is the divisor? when i click configure > advanced > and select LPC47M192 at $600 on ISA. i see the following. PWMOUT1 clock -- Always HIGH ($F) PWMOUT2 clock -- Always HIGH ($F) FAN1 mult ---- 1 FAN1 div ---- 1 FAN2 mult ---- 1 FAN2 div ---- 1 Reverse PWM01 logic --- OFF Reverse PWM02 logic --- OFF so i feel really dumb asking, wheres the divisor option? |
|
|
I see :-) Sorry: usually the BIOS sets that value to the most appropriate one. I added support to change that value for 95% of sensor chips. I need to add it for yours. |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2006-01-28 02:42 | thedragonmaster | New Issue | |
| 2006-01-28 02:42 | thedragonmaster | Video Card Model | => onboard |
| 2006-01-31 00:36 | thedragonmaster | Note Added: 0001466 | |
| 2006-02-07 16:28 | alfredo | Note Added: 0001481 | |
| 2006-02-07 16:28 | alfredo | Status | assigned => acknowledged |
| 2006-02-07 23:59 | thedragonmaster | Note Added: 0001505 | |
| 2006-02-10 09:46 | alfredo | Note Added: 0001522 |
