View Issue Details

IDProjectCategoryView StatusLast Update
0000398SpeedFanFan controlpublic2011-03-19 18:15
Reportergiacobar Assigned Toalfredo  
Status resolvedResolutionfixed 
PlatformWindowsOSWindows XPOS VersionHE SP2
Product Version4.26 
Summary0000398: Fans to 100% speed
DescriptionI've removed the check on "Set fan to 100% on closure".

After resuming from PC standby, the fans are set to 100%
Additional InformationPC based on Pentium 4 HT.
Asus Motherboard (Puffer -2)
TagsNo tags attached.
Motherboard Model
Video Card Model



2005-11-08 09:49

manager   ~0001351

Fans are back at 100% because BIOS reinitializes the hardware monitoring chip. If you properly configure SpeedFan to automatically control fan speeds, SpeedFan will take fan speeds back where needed in a few seconds (or minutes).

Issue History

Date Modified Username Field Change
2005-11-08 09:30 giacobar New Issue
2005-11-08 09:49 alfredo Note Added: 0001351
2005-11-08 09:49 alfredo Severity major => feature
2005-11-08 09:49 alfredo Category Clock control => Fan control
2005-11-08 10:33 alfredo Status assigned => acknowledged
2005-11-08 10:33 alfredo Description Updated
2011-03-19 18:15 alfredo Status acknowledged => resolved
2011-03-19 18:15 alfredo Resolution open => fixed