View Issue Details
|Fixed in Version
|0002598: No fan control on Asus Z97-A
|Motherboard fan speeds and fan control not showing in Speedfan 4.50 Beta 2. GPU, CPU, 2 other temperature sensors are recognized along with CPU thread and utilization information. All other functions other than fan control work.
|Steps To Reproduce
Left and Bottom controls for Fan speeds and setting are blank.
|Intel i7-4790k CPU Temperature are not accurate. Speedfan monitors it at 23-26c while other 2 monitoring software saying that it is on 36-40c. GPU temp is accurate
|No tags attached.
|Video Card Model
|BTW I already send report of my motherboard Asus Z97-A on Speedfan.
|Everything will work in 4.50 Final.
|Thank you so much on that status.. Asus Fan Expert is not good when monitoring other temps unlike speed fan. I came from z68 with working speedfan and I really love it. Will wait for that update. (y)
|Sausuke, if you send me an email I will send you the very latest beta.
|Sent you an email.. Hope you'll received it I just googled your email (can't find it here :(
Hello already tested your latest beta and sent a report.. Can't stop the fans but have info on my current fans but it's inaccurate based on the pic
Here's my fan orientation (Picture attached above)
Sys Fan and Aux2 Fan= that's my CPU Fan Speed and CPU OPT Fan Speed (2.7k rpm)
Aux Fan and Aux1 Fan= My other fans
I have 3 fans.. 2 front and one on the back which runs @ 1k rpm.. It seems the other fan (which I don't know) is not detected.. Hope this helps
I've already tried enabled and disabled q-fan tuning but I can't really adjust the speed via speedfan XD
@Core Temps.. it is accurate now :)
There's other temps as well like AUXTIN0 to AUXTIN3 which have this temperature
AUXTIN0=71c/-127c which is random to those numbers AUXTIN1=-128c AUXTIN2=36c AUXTIN3=127c
Thank you for the update. You can rename fans using the F2 key in CONFIGURE. SpeedFan labels them according to the H/M datasheet.
Some temperature sensors appear to be unused. Just uncheck them in CONFIGURE.
I am looking for the source of the readings of the other fans (with no success so far :-().
|will try to connect the other fan on chassis 2 (currently on chassis 4) and see if will can be detected by speedfan.. Feedback later :)