View Issue Details

IDProjectCategoryView StatusLast Update
0002580SpeedFanEventspublic2016-12-21 20:01
Reporter09876ggddzz Assigned Toalfredo  
PriorityimmediateSeverityblockReproducibilityalways
Status resolvedResolutionfixed 
OSWindowsOS Version7 64bit 
Product Version4.50 
Fixed in Version4.51 beta 
Summary0002580: RAM destroyed - first scan froze
DescriptionInstalled and started prog. It ran initial scan. Scan froze on what I think was RAM scan. Since there was no way to recover I restarted PC. After that computer will not boot at all. It stucks on LED POST C1 Detect memory, Auto-detection of DRAM size, type and ECC, Auto-detection...

 I tried to clear CMOS but nothing. I'm certain that RAM is dead.I guess it is not CPU.
Can you help? Anything that can be done? If not please post warning to other users.
Steps To ReproduceJust install and run the program. It will not result in explosion but it will burn RAM. So unlike those that got blown away Im still alive to report that software is big hazard for HW.
Additional InformationCPU: AMD Phenom 9500 2,2 GHz, 4mb c, socket AM2, bus 3600 mhz, 65nm, quad core

RAM: DDR2 4GB (2x2GB kit) PC 8500 (1066Mhz) OCZ Reaper DC Kit
TagsNo tags attached.
Motherboard ModelSapphire, s. AM2, PureCrossfire AM2RD790 ATI
Video Card ModelSAPPHIRE HD 6950 2GB GDDR5

Activities

Seraphim

2014-10-19 23:37

reporter   ~0008118

Last edited: 2014-10-20 10:45

http://lists.lm-sensors.org/pipermail/lm-sensors/2008-May/023020.html

http://lists.lm-sensors.org/pipermail/lm-sensors/2008-May/023027.html

So this is clearly related to my problem. Even same MBO and similar CPU. Sensor scan killed RAM or CPU.I guess that it could be dead CPU as well.

And let me state it before you ask. No I did not overcloak components neither was I about to try. All I wanted was to check CPU temp.

Their final conclusion:
http://lists.lm-sensors.org/pipermail/lm-sensors/2008-May/023054.html

alfredo

2014-10-20 10:51

manager   ~0008119

Hello, I am sorry to hear that. I feel rather lucky too, because I own that same motherboard model. I will blacklist it.

Seraphim

2014-10-20 13:33

reporter   ~0008120

Last edited: 2014-10-20 13:36

I pretty quickly realized that some component is dead and I that I will need to replace it. I will test components and let you know exactly was it RAM or CPU or anything else (hope not :) )

I was trying measure CPU temp due to fact that in 2 specific games, my PC would black-out and then go to recovery restart. I suspected GPU overheating, but it was ok, then I went to test CPU temp, but I got no further than scan.

It is possible that CPU started having some issues and that running sensor scan just added to it's inevitable end. It is good to have it black listed (maybe CPU and MOBO) so others don't end up having same damage. Based on LM-sensor discussion it can be that I was just unlucky, since they did not come to final conclusion what happened, but there is enough similarities for putting it to black list.

Thanks for quick response.

Seraphim

2014-10-21 08:02

reporter   ~0008121

It was CPU that got fried, all other components are fine.

Issue History

Date Modified Username Field Change
2016-12-21 20:01 09876ggddzz New Issue
2016-12-21 20:01 09876ggddzz Issue generated from: 0002315