View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0002454 | SpeedFan | Fan control | public | 2015-11-06 04:11 | 2019-01-09 07:15 |
| Reporter | walshcm | Assigned To | alfredo | ||
| Priority | normal | Severity | major | Reproducibility | always |
| Status | assigned | Resolution | open | ||
| OS | Microsoft Windows 10 | OS Version | Windows 10 Pro | ||
| Product Version | 4.52 beta | ||||
| Summary | 0002454: Z170 Maximus Hero VIII No control over Fan speeds | ||||
| Description | All fans are now detectable except for the water pump, which is not imperative. I can find my motherboard in the configure tab and change all fans from Smart Fan IV to manual. After changing I then attempt to add fan curves within the fan control tab. I choose Core0 as my core temps are represented accurately. I then can change the curve and run Prime95. The fans will all spike immediately to 100% during the torture test regardless of the fan curve I set. So no matter what the upper limit of the curve is, the fans will go to 100%. | ||||
| Additional Information | I have tested every possible setting and even removed Fan Xpert 3, and changed fan bios settings and the issue remains. | ||||
| Tags | No tags attached. | ||||
| Motherboard Model | Maximus Hero VIII Z170 | ||||
| Video Card Model | GTX 980Ti | ||||
|
|
Don't forget about the "Warning" values in the Configure - Temperatures tab. |
|
|
Thanks MaxusR. The only setting I did not touch was the warning values. I went in and changed them to 99 as I do not want my fan speeds based on that and after once again messing with the bios and disabling fan xpert3 service I appear to have control as intended. Probably would be a good thing to add a disable button on the "warning" values feature under temperatures. Can I close this ticket or does Alfredo have to? |
