View Issue Details

IDProjectCategoryView StatusLast Update
0002108SpeedFanFan controlpublic2013-03-21 22:51
Reportercdvonstinkpot Assigned Toalfredo  
PrioritynormalSeverityminorReproducibilityhave not tried
Status assignedResolutionopen 
PlatformWindowsOSWindowsOS Version7 Pro x64
Product Version4.49 
Summary0002108: Advanced fan control not working right
DescriptionWhen I set the curves to adjust the fan speed according to the temp, it will go to 100% like it should, but it doesn't back down once the temp lowers to where the curve should have the fan slowing down.
Steps To ReproduceSet advanced fan control to on.
Create profile.
Set curve to where your particular CPU regularly reaches.
Activate automatic fan control checkbox
Watch go to 100%
Watch temp drop to where you just set your curve to lower the fan speed and watch fan speed stay at 100%.
TagsNo tags attached.
Motherboard ModelDell Inspiron 1120
Video Card Model



2013-03-21 22:51

reporter   ~0007194

Readings > Configure > Speeds > Min value 0%, Max 100%
Readings > Configure > Temperatures > CPU > Desired 50C

Usually the value is stuck to 100% even the temp is 15C below desired.
Sometimes it's stuck to other values, like 60% for example.

I use v4.49 (everything was fine in v4.47)
Windows 8 pro 64-bit
ASRock N68-GS3 UCC

Issue History

Date Modified Username Field Change
2013-03-20 08:50 cdvonstinkpot New Issue
2013-03-20 08:50 cdvonstinkpot Status new => assigned
2013-03-20 08:50 cdvonstinkpot Assigned To => alfredo
2013-03-21 22:51 pinky Note Added: 0007194