View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0002108 | SpeedFan | Fan control | public | 2013-03-20 08:50 | 2013-03-21 22:51 |
| Reporter | cdvonstinkpot | Assigned To | alfredo | ||
| Priority | normal | Severity | minor | Reproducibility | have not tried |
| Status | assigned | Resolution | open | ||
| Platform | Windows | OS | Windows | OS Version | 7 Pro x64 |
| Product Version | 4.49 | ||||
| Summary | 0002108: Advanced fan control not working right | ||||
| Description | When I set the curves to adjust the fan speed according to the temp, it will go to 100% like it should, but it doesn't back down once the temp lowers to where the curve should have the fan slowing down. | ||||
| Steps To Reproduce | Set advanced fan control to on. Create profile. Set curve to where your particular CPU regularly reaches. Activate automatic fan control checkbox Watch go to 100% Watch temp drop to where you just set your curve to lower the fan speed and watch fan speed stay at 100%. | ||||
| Tags | No tags attached. | ||||
| Motherboard Model | Dell Inspiron 1120 | ||||
| Video Card Model | |||||
|
|
Settings: Readings > Configure > Speeds > Min value 0%, Max 100% Readings > Configure > Temperatures > CPU > Desired 50C Usually the value is stuck to 100% even the temp is 15C below desired. Sometimes it's stuck to other values, like 60% for example. I use v4.49 (everything was fine in v4.47) Windows 8 pro 64-bit ASRock N68-GS3 UCC |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2013-03-20 08:50 | cdvonstinkpot | New Issue | |
| 2013-03-20 08:50 | cdvonstinkpot | Status | new => assigned |
| 2013-03-20 08:50 | cdvonstinkpot | Assigned To | => alfredo |
| 2013-03-21 22:51 | pinky | Note Added: 0007194 |
