View Issue Details
|ID||Project||Category||View Status||Date Submitted||Last Update|
|0002105||SpeedFan||Hardware support||public||2013-03-10 16:54||2013-03-30 17:58|
|Target Version||Fixed in Version|
|Summary||0002105: Hangs when hard disks are attached to IBM BR10i SAS controller|
Speedfan 4.48 and 4.48 Beta 6 (both cannot be chosen atm in the dropdown field) hang when HDDs are attached to my SAS controller. It works well if there is no HDD present. It also works if started in SMBDEBUG mode, however it only recognizes three temp sensors and nothing else. NOSMB crashes as well.
SF hangs and has to be closed forcefully. After that, HDD access is no longer possible for other applications. As I was running a SMART self-test for the very first time I tried, this test was also stopped forcefully (gsmartcontrol says because of host reset). Windows doesn't shut down properly afterwards, so I call that a blocker.
|Steps To Reproduce||Buy BR10i and flash to IT mode (HBA only, no RAID functionality) ;)|
Attach at least one HDD
Hangs at "Scanning ISA BUS at $0CCB..."
|Additional Information||The IBM BR10i is based on a LSI card, just rebranded and stripped of some advanced RAID functionality. It is flashed with IT firmware, meaning it only acts as a Host Bus Adapter, doing no RAID stuff at all. Just handling over every single driver as it is.|
I use SATA drives with it over an SFF-8087 to 4x SATA breakout cable, and the drives have had 40 hours of testing without errors prior to installation and first start of Speedfan.
BR10i sits in the PCIe x16 slot (full x16), as the board doesn't offer a real x8. The graphics card occupies the x16@x4 slot (but I use RDP, so that doesn't make a difference)
|Tags||No tags attached.|
|Motherboard Model||Asus M5A97 LE R2.0|
|Video Card Model||Radeon HD 3450|