View Issue Details

Jump to NotesJump to History
IDProjectCategoryView StatusDate SubmittedLast Update
0001066SpeedFanFan controlpublic2008-01-23 16:332008-05-11 16:40
ReporterLyceum Assigned Toalfredo  
PrioritynormalSeverityminorReproducibilityalways
Status resolvedResolutionno change required 
OSWindowsOS VersionXP Pro 
Product Version4.33 
Summary0001066: CPU fan reads 0
DescriptionI use speedfan to control my CPU fan and usually set my CPU fan at 80%, speed fan detects the RPM of the fan until I set it to 80%, then it reads 0, to see the fan speed I have to either use another monotoring program or not set the speed below 85%.

I have tried uninstalling and reinstalling speedfan and still get the same results.
Steps To ReproduceHappens every time I put the CPU fan below 85%
TagsNo tags attached.
Motherboard Model
Video Card Model

Relationships

has duplicate 0001382 closedalfredo CPU FAN reports 0 rpm when RPM go below around 1340 

Activities

alfredo

2008-01-28 18:28

manager   ~0003238

You can read about this in the FAQ and in the article about PWM. Basically, all you need to do is enter CONFIGURE / ADVANCED and select a higher FAN DIVISOR. Usually 8 is ok, but for slow fans you might need to set it to 16.

Issue History

Date Modified Username Field Change
2008-01-23 16:33 Lyceum New Issue
2008-01-23 16:33 Lyceum Status new => assigned
2008-01-23 16:33 Lyceum Assigned To => alfredo
2008-01-28 18:28 alfredo Note Added: 0003238
2008-01-28 18:28 alfredo Status assigned => acknowledged
2008-05-11 16:40 alfredo Status acknowledged => resolved
2008-05-11 16:40 alfredo Resolution open => no change required
2008-05-11 16:40 alfredo Category Logging and charting => Fan control
2009-04-07 18:00 alfredo Relationship added has duplicate 0001382