View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0001026 | SpeedFan | Clock control | public | 2007-11-12 11:44 | 2008-02-22 21:05 |
| Reporter | micsimms | Assigned To | alfredo | ||
| Priority | normal | Severity | minor | Reproducibility | always |
| Status | assigned | Resolution | open | ||
| Platform | PC | OS | Vista Ultimate | OS Version | 32-bit |
| Product Version | 4.33 | ||||
| Summary | 0001026: Fan speeds adjusted but only when program drops them below 10% | ||||
| Description | I have looked at articles in the forum but maybe i looked in the wrong place. I need assistance with setting the right Advanced field values to make the percentage decreases relevant for my pc instead of all the speed adjustments taking place from 0-10%. The rpm readings are accurate at all times. I tried loading a config from the database but it made no difference as i think there may be a different chip on that board. I have an Aopen s661fxm-S and tried the -US variant on your database. If we can get this working successfully I will gladly submit my working profile to you. | ||||
| Steps To Reproduce | Default installation of Speedfan, temp 1 is mainboard and not set to adjust fans and 2 is cpu which i am using to control fan speeds. set to start minimised, debug, ISA and SMBus enabled. Speed1 and 2 automatically adjusted with lower limits of 8% which seems to be roughly 70-80% actual rpm. | ||||
| Additional Information | fans spin up and down ok as desired temp. limit is exceeded or dropped back below. I think it is related to the PWM output frequencies but wouldnt know where to start with them | ||||
| Tags | No tags attached. | ||||
| Motherboard Model | |||||
| Video Card Model | Sapphire X1600 Pro 512Mb AGP | ||||
|
|
Sorry forgot to mention Speedfan detects the system has a Winbond W83697HF chip. |
|
2007-12-01 19:53
|
|
|
|
Resolved by trial and error, kind of. The speeds are adjusted up and down to the lower rpm I require smoothly from 2200rpm at 100% to 1865 at 62% now. Previously this adjustment took place between 7-10% and was too sudden spinning up and too sluggish down from 100%. However if i drop the fan speed manually below 30% now the rpm reading doubles. Presumably this is to do with PWMOUT2 value being incorrect still as I only adjusted value 1. I have set a lower limit of 62% anyway as that seems to suit my chassis as far as temperature control and acoustics go. Old setting: PWMOUT1 clock 93.8KHz, PWMOUT2 clock 3.9 KHz Current setting: PWMOUT1 clock 33.5 Hz PWMOUT2 clock 3.9 KHz PLEASE however let me know, are these clock settings in any way going to screw up my winbond chip? |
|
|
Come on, i know you get lots of issues to look through on here but an answer would have been nice by now. |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2007-11-12 11:44 | micsimms | New Issue | |
| 2007-11-12 11:44 | micsimms | Status | new => assigned |
| 2007-11-12 11:44 | micsimms | Assigned To | => alfredo |
| 2007-11-12 11:44 | micsimms | Video Card Model | => Sapphire X1600 Pro 512Mb AGP |
| 2007-11-12 12:04 | micsimms | Note Added: 0003186 | |
| 2007-12-01 19:53 | micsimms | File Added: debug.nfo | |
| 2007-12-07 14:55 | micsimms | Note Added: 0003207 | |
| 2007-12-07 14:57 | micsimms | Note Edited: 0003207 | |
| 2007-12-07 14:58 | micsimms | Note Edited: 0003207 | |
| 2008-02-22 21:05 | micsimms | Note Added: 0003267 |
