View Issue Details

IDProjectCategoryView StatusLast Update
0000098SpeedFanLogging and chartingpublic2005-03-20 22:03
Reportergxc Assigned Toalfredo  
PrioritynormalSeveritytrivialReproducibilityalways
Status acknowledgedResolutionopen 
Product Version4.16 
Summary0000098: Entering 'Configure' section alters chart settings
DescriptionIf you enter the 'Configure' section, any items you were viewing in the charts become unchecked.
Steps To Reproduce1. On 'charts' tab, select some temperatures to monitor
2. Click the 'Readings' tab
3. Click 'Configure'
4. Click 'Cancel'
5. Click the 'Charts' tab
TagsNo tags attached.
Motherboard Model
Video Card Model

Activities

alfredo

2004-10-08 11:50

manager   ~0000373

Whenever you enter the CONFIGURE dialog, a lot of things might happen. Keeping track of what changed and what not is not an easy task. This is the reason why chart tab is reset. Anyway, consider that no hitory value is lost and you simply have to check again the values you want to chart.

flachschippe

2005-03-20 22:03

reporter   ~0000787

Yes, minimizing the effect of config changes to the charts would probably be difficult. However, there are some cases in which it should be easy to deceide that the chart does not need to be reset:
  o The most important one: When the cancel button is pressed, only those changes that have been 'applied' already should have an effect. Since the configure dialog has no 'Apply' button, no changes should be made, the charts should not be reset.
  o If only a speed setting was changed, at most the speed chart should be reset.
Same for temp setting and temp chart. Same for voltage settings and voltage chart.

Issue History

Date Modified Username Field Change
2004-09-28 15:25 gxc New Issue
2004-10-08 11:50 alfredo Note Added: 0000373
2004-10-08 11:50 alfredo Status assigned => acknowledged
2005-03-20 22:03 flachschippe Note Added: 0000787