View Issue Details

IDProjectCategoryView StatusLast Update
0000951SpeedFanHardware supportpublic2010-11-18 03:10
Reporterbonzo206 Assigned Toalfredo  
Status feedbackResolutionreopened 
PlatformGigabyte GA-MA69G-S3HOSVistaOS VersionUltimate 32bit
Summary0000951: Is support for Gigabyte GA-MA69G-S3H planned
DescriptionSpeedfan is running properly, but couldn't detect all of the motherboards sensors:

Win9x:NO 64Bit:YES GiveIO:NO SpeedFan:YES
I/O properly initialized
Linked ISA BUS at $0290
Scanning ISA BUS at $0290...
SMART Enabled for drive 0
Found ST9160821AS (160,0GB)
End of detection
Loaded 0 events

I see the temerature of the HDD and the AMD K8, but nothing else.

Do I have to customize speedfan?
TagsNo tags attached.
Motherboard Model
Video Card Modelonboard



2007-08-21 00:48

reporter   ~0002671

Last edited: 2007-08-21 00:53

EVEREST says GA-MA69G-S3H's ISA port is $0228, not $0290.
I tried modify SpeedFan 4.33 beta9 binary(exe), 0x90 at address 0x1DAC76 to 0x28, then sensors work fine(except fan RPM and speed control).
But sensor chip is detected as IT8712F (actual IT8716F).

Win9x:NO 64Bit:NO GiveIO:YES SpeedFan:YES
I/O properly initialized
Linked ISA BUS at $0228
Scanning ISA BUS at $0228...
  check 1
  check 2
  check 3
  check 4
IT8712F(2) check : 90 FF 12 FF
IT8712F(2) found on ISA at $228
SMART Enabled for drive 0
Found Hitachi HDT725032VLA360 (320.1GB)
End of detection
Loaded 0 events


2007-08-21 09:33

reporter   ~0002673

sounds good - firststep. How can I get the modified 4.33 beta9.exe? Are you working on fan RPM and speed control?


2007-08-21 12:19

reporter   ~0002674

>How can I get the modified 4.33 beta9.exe?
I made patch tool ( is not archive file, just a program.
This tool available until official update comes, because IT IS UNOFFICIAL.

>Are you working on fan RPM and speed control?
Sorry, I know ISA port address modification only.


2007-08-22 14:14

reporter   ~0002675

If I set PWM1 mode to software controlled under Advanced, I get the CPU fan running properly. I don't have a second fan to test PWM2.

What is still not working is the RPM speed:
HAving real 335 RPM (report on Gigabyte's easytune5), speedfan shows 192.857 - that's so far out of range, that I could correct it with FAN div.

Any suggestions?


2007-08-23 08:54

manager   ~0002692

Please, use the SEND REPORT facility on SpeedFan's INFO tab and include there your email address. Then send me a reminder at alfredo [at]
In report notes try to include the real fan speeds as a reference.


2007-08-23 09:42

reporter   ~0002705

o.k. I will do - thank's for oyur support


2007-08-23 16:19

manager   ~0002716

Did you send me the email?
I have a beta that should fix this.


2007-08-24 14:51

manager   ~0002735

The latest beta adds full support for this motherboard.


2008-03-07 10:34

reporter   ~0003291

Hi Alfredo,

I have now attached a second fan, but couldn't control it. CPU fan is working properly. I s there any chance to enable also fan-control for the second fan?

Thanks upfront for your support.

Cheers Juergen


2010-11-18 03:10

reporter   ~0005479

Hi Alfredo - it seems that Speedfan is still playing up on this board. It still recognises my board as having the IT8712F sensor, not the IT8716F.

If I load one of the config profiles, it comes up saying it finds the IT8716F, it then detects the IT8712F and uses these sensors instead.

Speedfan can't raise the CPU fan above 760 RPM (max is 1900 RPM) but it can adjust the speed between 300 and 760 RPM.

Any thoughts on this issue?


Issue History

Date Modified Username Field Change
2007-08-20 05:09 bonzo206 New Issue
2007-08-20 05:09 bonzo206 Video Card Model => onboard
2007-08-21 00:48 NAOYA Note Added: 0002671
2007-08-21 00:53 NAOYA Note Edited: 0002671
2007-08-21 09:33 bonzo206 Note Added: 0002673
2007-08-21 12:19 NAOYA Note Added: 0002674
2007-08-22 14:14 bonzo206 Note Added: 0002675
2007-08-23 08:54 alfredo Note Added: 0002692
2007-08-23 08:55 alfredo Status assigned => acknowledged
2007-08-23 09:42 bonzo206 Note Added: 0002705
2007-08-23 16:19 alfredo Note Added: 0002716
2007-08-24 14:51 alfredo Note Added: 0002735
2007-08-24 14:51 alfredo Severity minor => feature
2007-08-24 14:51 alfredo Status acknowledged => resolved
2007-08-24 14:51 alfredo Resolution open => fixed
2008-03-07 10:34 bonzo206 Status resolved => feedback
2008-03-07 10:34 bonzo206 Resolution fixed => reopened
2008-03-07 10:34 bonzo206 Note Added: 0003291
2010-11-18 03:10 goon_squad Note Added: 0005479