View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0002635 | SpeedFan | Hardware support | public | 2017-03-04 09:55 | 2018-12-20 04:58 |
| Reporter | fred--it | Assigned To | alfredo | ||
| Priority | normal | Severity | major | Reproducibility | always |
| Status | assigned | Resolution | open | ||
| Platform | x86 | OS | Windows | OS Version | 7 x64 |
| Product Version | 4.52 | ||||
| Summary | 0002635: Winbond/Nuvoton W83795 wrong detection on SUperMicro X8DTL | ||||
| Description | Hello, I'm trying to control 6 fans (2 cpu PWM fans and 4 e-pin fans) on Winbond/Nuvotron W83795G on SMBus. It's a server MB with minimal fan control via BIOS... Fans are at very high speed with very low temperatures. SF see the fans, but cannot control them. Speedfan seems to control only some other fans at 0 rpm on ISA bus. When speefan starts, there are some errors: Win9x:NO 64Bit:YES GiveIO:NO SpeedFan:YES I/O properly initialized Linked ISA BUS at $0290 Linked Intel 82801JIB ICH10 SMBUS at $0400 Found nVidia GeForce GTS 450 Linked nVidiaI2C0 SMBUS at $3D403E3F Linked nVidiaI2C1 SMBUS at $3D403637 Linked nVidiaI2C2 SMBUS at $3D405051 Scanning ISA BUS at $0290... SuperIO Chip=Winbond W83627DHG-P Linked ISA BUS at $0A10 Scanning Intel SMBus at $0400... STTS424E (ID=$0001) found on SMBus at $18 SMBus msg : 07:09:09.418 Unsuccessful SELB $FE to $18 on Intel SMBus msg : 07:09:09.418 Unsuccessful SELB $FE to $18 on Intel STTS424E (ID=$0001) found on SMBus at $1A Vendor : $A3A3 Scanning I2CNVidia SMBus at $3D403E3F... Scanning I2CNVidia SMBus at $3D403637... Scanning I2CNVidia SMBus at $3D405051... Scanning ISA BUS at $0A10... WARNING: bad Winbond($5CA3,$C1) identify (W83627DHG-P,W83667HG) W83627DHG-P (ID=$C1) found (using SuperIO) on ISA at $A10 Found MAXTOR STM3160211AS on AdvSMART Found IPMI Found Intel(R) Xeon(R) CPU E5620 @ 2.40GHz End of detection Loaded 0 events Moreover, IPMI fan speed readings are wrongs in any software (I don't know if it can be useful, maybe a conflict?) In attachment, SF, HWMonitor, IPMIUtils and AIDA64 reports I think report id 0001911 can be related to this. Thank You for your help. | ||||
| Steps To Reproduce | Start SF | ||||
| Tags | No tags attached. | ||||
| Motherboard Model | Supermicro X8DTL-6F | ||||
| Video Card Model | |||||
|
|
|
|
|
Don't forget to update your IPMI firmware (it's 3.13 for your board). You might want to look into ipmi utilities. Even the non-supermicro utils have a hard time controlling these options. Look here: https://siliconmechanics.zendesk.com/hc/en-us/articles/201122989-Changing-fan-speeds-for-X9-X10-series-boards https://serverfault.com/questions/662526/fan-speeds-on-supermicro-system-via-ipmi https://asgardahost.org/useful-raw-commands-for-supermicro-ipmi-modules/ Of course this will not help much if your fans are screamers! With the X8DT3-F I had to apply these ipmi settings after each boot. With smcipmitool you could make a batch file. |
