View Issue Details
|no change required
|0002618: Fan Control Response graph ignores settings above 60C
|If I link any fan speed to CPU temp sensor (or any other) the program kicks in fan speed at 100% after passing 60C regardless of whatever curve drawn.
|Steps To Reproduce
|1. In Fan Control link any fan to any temp sensor.
3. Extend horizontal grid to say 70, 80 or 90 degrees.
2. Draw whatever curve. А flat line at 50%, for example.
3. SpeedFan will set the chosen fan speed to 100% after passing 60C regardless of the curve drawn.
|It can be worked around by minus offsetting the sensor temperature in Advanced tab and readjusting curve according to the offset. This way it reads the Response graph ok, however it's quite cumbersome.
The issue also affects stable 4.44 version.
My chip is IT8728F.
I guess this issue might be related to the fact that the rightmost point of the default Response screen is 60C. It might be stuck as a constant somewhere in the code instead of variable.
|No tags attached.
|Video Card Model
|ATI Radeon HD 6770