View Issue Details

Jump to NotesJump to History
IDProjectCategoryView StatusDate SubmittedLast Update
0002195SpeedFanUser interfacepublic2013-11-22 01:102013-11-22 01:10
Reportereduncan911 Assigned Toalfredo  
PrioritynormalSeveritytweakReproducibilityalways
Status assignedResolutionopen 
PlatformWin8.1OSMicrosoft WindowsOS Version8.1
Product Version4.49 
Summary0002195: Faster Startup
DescriptionThe startup scans take too long during normal operation, well over 45 seconds.
Steps To ReproduceStart up SpeedFan
Configure a custom Fan Controller.
Close it.
Reboot.
Startup SpeedFan again. Wait 45+ seconds for it to scan all buses, all over again.
Additional InformationThis is more a feature and/or tweak request. Is it possible to lock in the found memory addresses after an initial scan? So that it a scan doesn't have to occur on every startup?

Say, a "cache of found addresses" kept in an INI or registry location, and a button to "Rescan" that refreshes that list manually?

Currently, my Asus Rampage IV Extreme shows the following:

Nuvoton NCT6776F
INTEL CORE

I use the Nuvoton NCT6776F to control the CPU PWM fan in my waterchiller, and I use the INTEL CORE to monitor the temps for that control.

If there is a way for my to disable these scans via the command line, and keep the functionality of these two, I will. I know the command line allows disabling of these scans, but I am not sure if it will allow me control over those devices if I disable the scans (maybe there already is a cache?).

Well, I will try disabling scans via command switches and see if it still works.
TagsNo tags attached.
Motherboard ModelAsus Rampage IV Extreme
Video Card ModelEVGA GTX TITAN

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2013-11-22 01:10 eduncan911 New Issue
2013-11-22 01:10 eduncan911 Status new => assigned
2013-11-22 01:10 eduncan911 Assigned To => alfredo