View Issue Details

IDProjectCategoryView StatusLast Update
0002173SpeedFanConfigurationpublic2014-12-13 13:43
ReporterMikmouse Assigned Toalfredo  
Status resolvedResolutionfixed 
PlatformGigabyte GA-Z68XP-UD4OSWindows 8.1OS Version9600.16384
Product Version4.49 
Fixed in Version4.51 beta 
Summary0002173: Windows 8.1 (BSOD) at launch of SpeedFan
DescriptionWindows 8.1 August 2013 installed on Hard Disks in RAID 0 (2x WD10EZEX)
Latest SATA Raid Intel Drivers installed (August 19, 2013, version ).
All others drivers are up to date (Video, Audio)
Windows has few programs installed. SpeedFan install fine.

At first launch of Speedfan before any configuration, Windows got BSOD into IasTorA.sys (Raid Driver)

I did not have any problem before with same configuration on Windows 8.
Steps To ReproduceEvery time I launch SpeedFan I got BSOD when SpeedFan load and scan.

I add in command line /NOSMARTSCAN then add /NOACPISCAN without success. Still BSOD.

I Imaging my C: partition, then re-install Windows 8.1 using an older low Intel Driver. version 11.8xx ... Same Issue, same BSOD.
Speedfan cannot be configured. So from an older Disk Image I extracted the Speedfan configuration files (Windows 8) and copied them into SpeeFan directory with no luck... Still BSOD.
Additional InformationIt seems that SpeedFan crashes when checking Signatures..
Attached is the small log created just before the BSOD.
TagsNo tags attached.
Motherboard ModelGigabyte GA-Z68XP-UD4 Processor I 2500k - Stock speed
Video Card ModelMSI GTX 660



2013-09-05 18:24


debug.nfo (52,594 bytes)


2013-09-08 16:48

reporter   ~0007282

I found a way to prevent BSOD into Windows 8.1 before better solution, when starting SpeedFan.
Into devices manager, My Hard Disks are seen as SCSI drives by the driver. (they are both SATA III)
Le périphérique SCSI\Disk&Ven_ATA&Prod_WDC_WD10EZEX-00R\4&10ed5902&3&050000 a été démarré." end quote.

So I added in command line /NOSCSISCAN /NOSMARTSCAN to prevent access to Hard Disks.

Since, SpeedFan start and works normally without crashing BSOD Windows.
Sorry I can't post the debug.nfo log. Got error.
Hope this can help.


2013-09-28 03:13

reporter   ~0007287

Last edited: 2013-09-28 03:18

I can echo this behavior - same thing, must be using latest Intel RST driver on Windows 8.1, Bugcheck BSOD on iastora.sys right after speedfan starts scanning but doesn't launch. Worked fine before Windows+RST upgrade. Uploaded debug-slidey.nfo. ASUS P6T Deluxe V2

/NOSCSISCAN /NOSMARTSCAN allows it to launch for me too. I miss my HDD temps, though :D

Thanks for this great tool!


2013-09-28 03:13


debug-slidey.nfo (56,100 bytes)


2013-11-22 23:57

reporter   ~0007302

+1 for me on a Gigabyte Z87X-UD3H on Windows 8.1 x64 Pro


2013-12-08 16:25

reporter   ~0007305

Last edited: 2013-12-24 06:23

I can confirm speedfan 4.49 crashes the system on launch when using RST in Windows 8.1. It has done this on both my Ivy Bridge with 7 Series SATA controller as well as my Haswell system with 8 Series SATA controller.

/NOSCSISCAN allows speedfan to launch and not cause a BSOD.

/NOSMARTSCAN isn't needed to avoid the BSOD and speedfan correctly reports HDD temps via SMART.

RST is out:

I installed it but have yet to test speedfan against it without the /NOSCSISCAN flag.


2014-01-12 05:37

reporter   ~0007318

As a further reference input, the same fault happens for me using Gigabyte Z87M-D3H, Windows 8.1 Pro x64.
Intel RST driver

Launching speedfan directly, it appears the hard disks are showing as "SCSI" then immediately windows crash in iaStorA.sys.

Launching via "speedfan.exe /NOSCSISCAN" then speedfan starts fine, no crash, and still can find both disks.


2014-02-03 02:11

reporter   ~0007327

It also happens to me on a freshly installed Windows 8.1.
Hardware is Fujitsu S904, cpu i7-4600U, and chipset is likelly the QM87 (DH82QM87 PCH).


2014-03-14 08:58

reporter   ~0007355

Error confirmed on Gigabyte Z77X-UD3H, completly updated Windows 8.1 Pro, Intel RST, Intel Chipset Driver 10.0.13.

/NOSCSISCAN switch works for me as it avoids the BSOD. Fan control is working.

Hardware overview: Gigabyte Z77X-UD3H, Intel Core I7-370K, Zotac GeForce 680 GTX, 4 x 4 GB 1866 RAM, SSD: Corsair CSSD-F120GB2, SSD: C400-MTFDDAC128MAM, SSD: OCZ-VERTEX3 120, HDD: SAMSUNG HD204UI

Also sent a report via Speedfan integrated upload form a minute or two ago.

At this point I would like to thank you (including donation, also a minute ago) for your excellent work over the last years. Speedfan also worked absolutly perfect for me. This is the first time Speedfan produces an BSOD. I would really appreciate if you keep up the excellent work as there is nothing comparable like speedfan out there!


2014-05-28 22:23

reporter   ~0007396

Any chance to make it work with Windows 8.1?


2014-06-03 15:41

reporter   ~0007398

According to Viprex, looks like RST did not solve this issue and that /NOSCSISCAN still seems to be the only viable workaround.

I know there's an RST 13 Beta but I'm not sure if it solves it.

As for neohidra's issue, Speedfan works fine on Windows 8.1, you are most likely experiencing the RST/Speedfan BSOD issue.

Simply launch Speedfan with the /NOSCSISCAN switch and it will be fine.

At this point I feel that Speedfan should have /NOSCSISCAN enabled by default, Intel doesn't seem to want to fix this and BSODs aren't making Speedfan look good even if Speedfan isn't at all to blame.


2014-08-08 20:33

manager   ~0007437

Can you send me a report using the latest beta available online?
The latest beta changes the order in which hard disk access methods are tested.
This is clearly a driver issue. All the calls done by SpeedFan to access the hard disks are done in userspace. This means that they can cause a BSOD only if the driver is buggy. So far, I have always seen the drivers being fixed :-)


2014-08-08 22:16

reporter   ~0007440

Last edited: 2014-08-08 22:37

Hi Alfredo,

I just upgraded to Intel Rapid Storage which is the one released after and I tried starting up speedfan 4.49 without /NOSCSISCAN, lo, and behold, no BSOD. However an interesting message popped up in the scan log:

Found APPLE HDD ST3000DM001 on AdvSMART
Found SCSI drive HDD ST3000DM001 (3000.6GB)
ProbeSCSI: WARNING: hard disk skipped because of invalid returned LogSense data

Also tried just tried 4.50 Beta 2, same warning pops up.

Anyways, so yah it seems that the proper fix for the the BSOD issue is to simply upgrade RST to or later(hopefully).


2014-08-19 00:41

reporter   ~0007501

Last edited: 2014-08-19 00:43

I have the same Mainboard as reedy (GA-Z68X-UD3H-B3) and also got this problem. Speedfan refuses to start. Instead of starting the software my whole system freezes (bluescreen).

Speedfan doesn't even create a debug logfile.

If I set the parameters "/NOSCSISCAN /NOSMARTSCAN" I get still the same problem.

I tried to install RST 13, but looks like I don't need this because the installer tells me that my system is not compatible.


2014-08-19 09:32

manager   ~0007504

lordimac, is there any other similar tool running that might interfere with SpeedFan?
Please, try with


command line parameters.


2014-08-19 16:15

reporter   ~0007512

Last edited: 2014-08-19 16:17

Same bluescreen.

My shortcut target looks like this:

"C:\Program Files (x86)\SpeedFan\speedfan.exe" /NOSCSISCAN /NOSMARTSCAN /NOSUPERIO /NOSMBSCAN

No other software for fan control or temperature is installed. Can I assist you in any way with some debug tools?


2014-08-19 16:41

manager   ~0007513

lordimac, please mail me (alfredo [at] DEBUG.NFO from SpeedFan's directory.


2014-08-19 17:02

reporter   ~0007514

Last edited: 2014-08-19 19:38

The problem is, there is no debug.nfo file.

edit: Crash dump gets only created if I start Speedfan without any parameters. I could send you this dump if you want.


2014-08-20 16:48

reporter   ~0007517

Was able to update my RST to but it doesn't solve the bluescreen problem. :-(


2014-08-20 16:53

manager   ~0007518

Cpuroasts suggests "".
Did you try "/NOSCSISCAN" command line parameter?


2014-08-20 17:22

reporter   ~0007519

I can't upgrade to 13 because V13 is not compatible with my platform.

I tried all 4 parameters "/NOSCSISCAN /NOSMARTSCAN /NOSUPERIO /NOSMBSCAN" and got a bluescreen. How can I help you? I'm willing to install other software to help you debugging it. Should I open another ticket for it or wite you an email?


2014-08-20 19:16

reporter   ~0007520

Last edited: 2014-08-20 19:23

I just read the release notes for 13.1, it seems Intel has officially removed support for Series 6 and older in RST 13.1. Z68 is part of Series 6.

13.1 is only compatible with:

    - Intel(R) 9 Series Chipset Family SATA AHCI/RAID Controller
    - Intel(R) 8 Series/C220 Series Chipset Family SATA AHCI/RAID Controller
    - Intel(R) 7 Series/C216 Series Chipset Family SATA AHCI/RAID Controller
    - Intel(R) C600 Series Chipset SATA AHCI Controller

So it doesn't look like the SpeedFan BSOD bug in RST is ever going to be fixed on lordimac's system in a newer version of RST.

People on these older platforms essentially have 2 choices:

1. Revert to an older one, since 12.8 and 12.9 are confirmed to have the issue, maybe 12.7 or older doesn't.

2. If only AHCI is in use and not Intel RAID(Stripe, Mirror, Raid5-6) and the OS is Windows Vista or newer, un-install RST completely from Programs and feature, this will revert the AHCI driver to the stock Microsoft provided AHCI driver. It may not be as fast for SSDs, but it shouldn't BSOD with speedfan.


2014-08-20 19:20

reporter   ~0007521

I will give it a try later with uninstalling RST and reverting the driver back to the Microsoft driver.


2014-08-20 19:21

manager   ~0007522

Thank you for the information, Cpuroast.


2014-08-20 19:26

reporter   ~0007524

I'm still surprised that /NOSCSISCAN doesn't solve the issue for lordimac.

It's been confirmed by me and several other people to solve the BSOD issue with RST 12.8/9 and SpeedFan.


2014-08-20 19:28

manager   ~0007525

I agree. It surprises me too.


2014-08-20 20:08

reporter   ~0007526

Allright, I uninstalled RST, reverted the SATA AHCI Controller driver back to the original one from Microsoft (Driver date 06/21/2006) and tried to run Speedfan.

First without any parameters -> Bluescreen
With parameter /NOSCSISCAN -> Bluescreen

Must be something else. :( What can it be? Is it useful if I upload the bluescreen dump file?


2014-08-20 20:19

reporter   ~0007527

And you are sure it's running the MS AHCI one?
And this is with the latest SpeedFan which is version 4.50?


2014-08-20 21:25

reporter   ~0007528

Last edited: 2014-08-20 21:26

Well, it was 4.50 beta (didnt see that it's final now), but still happens with 4.50 final.

Yes I'm sure, I took the driver date right from the device manager.

Anyway, updated now back to Intel RST 12 because it looks like it's something else then the AHCI driver.

Maybe graphic card? Running an Zotac nVidia GTX 570 AMP.


2014-08-20 21:54

reporter   ~0007529

Last edited: 2014-08-20 21:54

At this point: feel free to try all of the parameters listed here:


except the following which are pretty much guaranteed not to help:



2014-08-21 00:01

reporter   ~0007530

Still bluescreen if I add every parameter. :-(


2014-08-21 09:24

manager   ~0007532

Lordimac, please contact me by email (alfredo [at]


2014-08-21 21:17

manager   ~0007540

UPDATE: Lordimac's issue was not related to the Intel driver at all.
To stay on the safe side I will mark this issue as resolved in SpeedFan 4.51 beta :-)

Issue History

Date Modified Username Field Change
2013-09-05 18:24 Mikmouse New Issue
2013-09-05 18:24 Mikmouse Status new => assigned
2013-09-05 18:24 Mikmouse Assigned To => alfredo
2013-09-05 18:24 Mikmouse File Added: debug.nfo
2013-09-08 16:48 Mikmouse Note Added: 0007282
2013-09-28 03:13 slidey Note Added: 0007287
2013-09-28 03:13 slidey File Added: debug-slidey.nfo
2013-09-28 03:15 slidey Note Edited: 0007287
2013-09-28 03:18 slidey Note Edited: 0007287
2013-11-22 23:57 reedy Note Added: 0007302
2013-12-08 16:25 Cpuroast Note Added: 0007305
2013-12-24 06:13 Cpuroast Note Edited: 0007305
2013-12-24 06:14 Cpuroast Note Edited: 0007305
2013-12-24 06:23 Cpuroast Note Edited: 0007305
2014-01-12 05:37 tafxyz Note Added: 0007318
2014-02-03 02:11 joaocc Note Added: 0007327
2014-03-14 08:58 Viprex Note Added: 0007355
2014-05-28 22:23 neohidra Note Added: 0007396
2014-06-03 15:41 Cpuroast Note Added: 0007398
2014-08-08 20:33 alfredo Note Added: 0007437
2014-08-08 20:33 alfredo Status assigned => acknowledged
2014-08-08 22:16 Cpuroast Note Added: 0007440
2014-08-08 22:18 Cpuroast Note Edited: 0007440
2014-08-08 22:34 Cpuroast Note Edited: 0007440
2014-08-08 22:35 Cpuroast Note Edited: 0007440
2014-08-08 22:37 Cpuroast Note Edited: 0007440
2014-08-19 00:41 lordimac Note Added: 0007501
2014-08-19 00:43 lordimac Note Edited: 0007501
2014-08-19 09:32 alfredo Note Added: 0007504
2014-08-19 16:15 lordimac Note Added: 0007512
2014-08-19 16:16 lordimac Note Edited: 0007512
2014-08-19 16:17 lordimac Note Edited: 0007512
2014-08-19 16:41 alfredo Note Added: 0007513
2014-08-19 17:02 lordimac Note Added: 0007514
2014-08-19 19:38 lordimac Note Edited: 0007514
2014-08-20 16:48 lordimac Note Added: 0007517
2014-08-20 16:53 alfredo Note Added: 0007518
2014-08-20 17:22 lordimac Note Added: 0007519
2014-08-20 19:16 Cpuroast Note Added: 0007520
2014-08-20 19:16 Cpuroast Note Edited: 0007520
2014-08-20 19:17 Cpuroast Note Edited: 0007520
2014-08-20 19:18 Cpuroast Note Edited: 0007520
2014-08-20 19:20 lordimac Note Added: 0007521
2014-08-20 19:21 alfredo Note Added: 0007522
2014-08-20 19:23 Cpuroast Note Edited: 0007520
2014-08-20 19:26 Cpuroast Note Added: 0007524
2014-08-20 19:28 alfredo Note Added: 0007525
2014-08-20 20:08 lordimac Note Added: 0007526
2014-08-20 20:19 Cpuroast Note Added: 0007527
2014-08-20 21:25 lordimac Note Added: 0007528
2014-08-20 21:25 lordimac Note Edited: 0007528
2014-08-20 21:25 lordimac Note Edited: 0007528
2014-08-20 21:26 lordimac Note Edited: 0007528
2014-08-20 21:54 Cpuroast Note Added: 0007529
2014-08-20 21:54 Cpuroast Note Edited: 0007529
2014-08-21 00:01 lordimac Note Added: 0007530
2014-08-21 09:24 alfredo Note Added: 0007532
2014-08-21 21:17 alfredo Note Added: 0007540
2014-08-21 21:18 alfredo Status acknowledged => resolved
2014-08-21 21:18 alfredo Resolution open => fixed
2014-08-21 21:18 alfredo Fixed in Version => 4.51 beta
2016-12-21 20:01 09876ggddzz Issue cloned: 0002586