View Issue Details

Jump to NotesJump to History
IDProjectCategoryView StatusDate SubmittedLast Update
0001036SpeedFanOtherpublic2007-12-09 13:312007-12-09 13:34
Reportermdcobra Assigned Toalfredo  
PrioritynormalSeveritycrashReproducibilityrandom
Status assignedResolutionopen 
PlatformX86OSWindows XP Pro 32bitOS VersionSP2
Product Version4.33 
Summary0001036: "random" BSOD's
DescriptionToday I was investigating why my system is unstable.
So I was using WinDbg to go through my minidumps, and discovered Speedfan might be causing the problem. I think I have about 3 dumps. I will put the output from WinDbg in additional comments.
Steps To ReproduceThe BSOD's seem random, so it is difficult, but I do get them frequently.
Additional InformationCan you recommend a workaround, i.e. using 4.32?
1 crash seems to be the same as bug 0001022.
TagsNo tags attached.
Motherboard Model
Video Card Model2*7900 GT in SLI (1 Sparcle and 1 Leadtek)

Activities

2007-12-09 13:31

 

SpeedFanReport.TXT (59,001 bytes)    
Advanced Micro Devices AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ family 15 model 11 stepping 1 brand 0 1220 MHz (128,0 Kb level 1 - 512,0 Kb level 2 - 0 bytes level 3)
Running at 1220 MHz
I Agree to receive beta versions : ON

*****************************

IT8712F-I on ISA at $290 Temp1 : 33,0   min=30,0   max=39,0   mean=33,8
IT8712F-I on ISA at $290 Temp2 : 34,0   min=34,0   max=36,0   mean=34,0
IT8712F-I on ISA at $290 Temp3 : 30,0   min=28,0   max=40,0   mean=30,6
IT8712F-I on ISA at $290 Fan1 : 1042   min=1035   max=2250   mean=1043
IT8712F-I on ISA at $290 Fan2 : 1350   min=1318   max=2519   mean=1359
IT8712F-I on ISA at $290 Fan3 : 0   min=0   max=168750   mean=748
IT8712F-I on ISA at $290 Fan4 : 0   min=0   max=0   mean=0
IT8712F-I on ISA at $290 Fan5 : 0   min=0   max=0   mean=0
IT8712F-I on ISA at $290 Pwm1 : 45%   min=45%   max=100%   mean=45%
IT8712F-I on ISA at $290 Pwm2 : 40%   min=40%   max=100%   mean=40%
IT8712F-I on ISA at $290 Pwm3 : 0%   min=0%   max=0%   mean=0%
IT8712F-I on ISA at $290 Pwm4 : 50%   min=50%   max=50%   mean=50%
IT8712F-I on ISA at $290 Pwm5 : 50%   min=50%   max=50%   mean=50%
IT8712F-I on ISA at $290 Vcore1 : 1,10   min=1,09   max=1,36   mean=1,16
IT8712F-I on ISA at $290 Vcore2 : 0,00   min=0,00   max=0,00   mean=0,00
IT8712F-I on ISA at $290 +3.3V : 3,22   min=3,20   max=3,23   mean=3,22
IT8712F-I on ISA at $290 +5V : 4,87   min=4,87   max=4,92   mean=4,89
IT8712F-I on ISA at $290 +12V : 11,97   min=11,90   max=11,97   mean=11,95
IT8712F-I on ISA at $290 -12V : -1,83   min=-2,24   max=-1,83   mean=-1,83
IT8712F-I on ISA at $290 -5V : -8,78   min=-8,78   max=-8,78   mean=-8,78
IT8712F-I on ISA at $290 +5V : 4,84   min=4,84   max=4,87   mean=4,84
IT8712F-I on ISA at $290 Vbat : 3,07   min=3,07   max=3,07   mean=3,07
[$13]=$73  [$14]=$00  [$15]=$46  [$16]=$4C
[$17]=$40  [$20]=$45  [$21]=$00  [$22]=$C9
[$23]=$B5  [$24]=$BB  [$25]=$B8  [$26]=$00
[$27]=$B4  [$28]=$C0
LM75 on nForce2 SMBus at $48 Temp : 0,0   min=9,99999999999999966E89   max=-9,99999999999999966E89   mean=0,0
LM75 on nForce2 SMBus at $49 Temp : 0,0   min=9,99999999999999966E89   max=-9,99999999999999966E89   mean=0,0
HD0 (300,1GB) on SMART at $0 HD0 : 34,0   min=34,0   max=34,0   mean=34,0
Maxtor 6V300F0 (drive 0) : fitness=97%   performance=97%
HD1 (500,1GB) on SMART at $1 HD1 : 28,0   min=28,0   max=28,0   mean=28,0
SAMSUNG HD501LJ (drive 1) : fitness=97%   performance=98%
HD2 (320,1GB) on SMART at $2 HD2 : 35,0   min=35,0   max=35,0   mean=35,0
Maxtor 6V320F0 (drive 2) : fitness=97%   performance=97%
HD3 (300,1GB) on SMART at $3 HD3 : 33,0   min=32,0   max=33,0   mean=33,0
Maxtor 6V300F0 (drive 3) : fitness=97%   performance=97%
ACPI on ISA at $0 Temp1 : 40,0   min=40,0   max=40,0   mean=40,0
AMD K8 on PCI at $0 Core : 32,0   min=27,0   max=39,0   mean=32,9
NVidia Video Card on NVCPL at $0 Core : 44,0   min=43,0   max=47,0   mean=44,0
NVidia Video Card on NVCPL at $0 Ambient : 0,0   min=0,0   max=0,0   mean=0,0

*****************************

Temp1 --> active=ON  chip=0  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
Temp2 --> active=ON  chip=0  index=2 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
Temp3 --> active=ON  chip=0  index=3 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
Temp --> active=OFF  chip=1  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
Temp --> active=OFF  chip=2  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
HD0 --> active=ON  chip=3  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
HD1 --> active=ON  chip=4  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
HD2 --> active=ON  chip=5  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
HD3 --> active=ON  chip=6  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
Temp1 --> active=OFF  chip=7  index=1 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=
Core --> active=ON  chip=8  index=1 wanted=52  warning=58  offset=0  InTray=ON Used pwms=1 
7900 --> active=ON  chip=9  index=1 wanted=56  warning=70  offset=0  InTray=OFF Used pwms=2 
Ambient --> active=OFF  chip=9  index=2 wanted=40  warning=50  offset=0  InTray=OFF Used pwms=1 2 
Fan1 --> active=ON  chip=0  index=1
Fan2 --> active=ON  chip=0  index=2
Fan3 --> active=ON  chip=0  index=3
Fan4 --> active=OFF  chip=0  index=4
Fan5 --> active=OFF  chip=0  index=5
Speed01 --> active=ON  chip=0  index=1  min=45  max=70  variate=ON
Speed02 --> active=ON  chip=0  index=2  min=40  max=65  variate=ON
Speed03 --> active=OFF  chip=0  index=3  min=0  max=100  variate=OFF
Speed04 --> active=OFF  chip=0  index=4  min=0  max=100  variate=OFF
Speed05 --> active=OFF  chip=0  index=5  min=0  max=100  variate=OFF
Vcore1 --> active=ON  chip=0  index=1
Vcore2 --> active=ON  chip=0  index=2
+3.3V --> active=ON  chip=0  index=3
+5V --> active=ON  chip=0  index=4
+12V --> active=ON  chip=0  index=5
-12V --> active=ON  chip=0  index=6
-5V --> active=ON  chip=0  index=7
+5V --> active=ON  chip=0  index=8
Vbat --> active=ON  chip=0  index=9
Set Fans to 100% on exit : OFF
Debug Mode : ON
Use ISA : ON
Use SMB : ON
Scan PCI : ON
Scan SMB : ON
Slow SMB detection : OFF
Detect SuperIO : ON
ASUS Card Detect : ON
DELL Support : OFF
Command line : "C:\Program Files\SpeedFan\speedfan.exe" 
Delta Fan Speed : 10

*****************************

Chipset : nVidia nForce4
SMBus Base Address : $4C40
SMBus Revision : A2
SMBus I/O Enabled : ON

*****************************

Bus : 00 Device: 00 Function : 00 --> 005E10DE Vendor : 10DE Device : 005E (rev A3) - <Unknown device>
00: 10DE 005E 0006 00B0 00A3 0580 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 1043 815A 0000 0000 0044 0000 0000 0000 00FF 0000
40: 1043 815A E008 01E0 0022 1111 00D0 0000 0523 807F 0003 0000 0000 0003 0000 0000
60: 0000 0000 0000 0000 0000 0000 3606 0000 4444 0000 09D0 0000 0000 0000 0088 0000
80: FF13 0088 00FA 0000 0003 0000 0061 0000 100E 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0101 0101 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0003 0000 A000 0000 0000 0000 0000 0000 0000 0000
E0: 0008 A801 0000 FEE0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 01 Function : 00 --> 005010DE Vendor : 10DE Device : 0050 (rev F3) - <Unknown device>
00: 10DE 0050 000F 00A0 00F3 0601 0000 0080 0000 0000 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 1043 815A 0000 0000 0000 0000 0000 0000 0000 0000
40: 1043 815A F000 FEFF 3EFA 00FF 3EFA 00FF 3EFA 00FF 5A00 0262 0000 0100 0000 FFFF
60: 4001 0000 4401 0000 4801 0000 0000 FFF9 0010 FFFF 00C5 0000 0000 1904 D210 0D20
80: 8009 D200 0101 0000 00C0 0100 0000 0000 0000 0000 0000 0000 6421 A987 BCDE 0000
A0: 8000 C110 0002 0000 0000 0000 0000 0000 0290 02EF 0800 085F 0000 0000 0000 0000
C0: 8235 0080 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 1414 0000 0000 00D0 3080 2000 4461 1144 FF5A BF5F 0000 C000 FF10 FFFF 0000 0730

Bus : 00 Device: 01 Function : 01 --> 005210DE Vendor : 10DE Device : 0052 (rev A2) - <Unknown device>
00: 10DE 0052 0001 00B0 00A2 0C05 0000 0080 DC01 0000 0000 0000 0000 0000 0000 0000
20: 4C01 0000 4C41 0000 0000 0000 1043 815A 0000 0000 0044 0000 0000 0000 010B 0103
40: 1043 815A 0001 C002 0000 0000 0000 0000 4C01 0000 4C41 0000 0000 0000 0000 0000
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 02 Function : 00 --> 005A10DE Vendor : 10DE Device : 005A (rev A2) - <Unknown device>
00: 10DE 005A 0007 00B0 10A2 0C03 0000 0080 3000 D800 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 1043 815A 0000 0000 0044 0000 0000 0000 0117 0103
40: 1043 815A 0001 FE02 0000 0000 0000 0000 0003 0000 471D 0040 0000 0000 0000 0000
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FF00 FFFF FC03 0731

Bus : 00 Device: 02 Function : 01 --> 005B10DE Vendor : 10DE Device : 005B (rev A3) - <Unknown device>
00: 10DE 005B 0006 00B0 20A3 0C03 0000 0080 0000 FEB0 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 1043 815A 0000 0000 0044 0000 0000 0000 0214 0103
40: 1043 815A 800A 2098 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
60: 2020 0001 6000 8518 3C03 013F 0000 0000 0000 0508 1000 8020 3D89 22B6 2577 0004
80: 0001 FE02 0000 0000 0000 0000 1615 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0001 0000 0000 C000 0000 0000 0000 0000 0033 2211 0044 0000 03FF 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FF10 FFFF 0A04 0730

Bus : 00 Device: 06 Function : 00 --> 005310DE Vendor : 10DE Device : 0053 (rev F2) - NVIDIA Corporation NVidia nForce 4 SLI IDE Controller
00: 10DE 0053 0005 00B0 8AF2 0101 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
20: F001 0000 0000 0000 0000 0000 1043 815A 0000 0000 0044 0000 0000 0000 0000 0103
40: 1043 815A 0001 0002 0000 0000 0000 0000 F003 0001 0000 0000 A8A8 2020 006A 2099
60: 0000 C000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0000 0000 C180 5092 0000 2C16 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FF10 FFFF 0300 0730

Bus : 00 Device: 07 Function : 00 --> 005410DE Vendor : 10DE Device : 0054 (rev F3) - NVIDIA Corporation NVidia nForce 4 SLI IDE Controller
00: 10DE 0054 0007 00B0 85F3 0101 0000 0000 09F1 0000 0BF1 0000 0971 0000 0B71 0000
20: D801 0000 2000 D800 0000 0000 1043 815A 0000 0000 0044 0000 0000 0000 0115 0103
40: 1043 815A 0001 0002 0000 0000 0000 0000 0013 1500 0000 0000 A8A8 20A8 006A 2099
60: 0000 C000 0C51 0000 0F08 4206 0000 0000 782C 40C4 1001 0000 1001 0000 0020 0020
80: 0000 C000 0000 795D 0000 31AC E000 07F3 0000 2A74 0000 0000 0006 1006 0000 0101
A0: 0150 7C00 0000 0000 0000 0000 BB33 02AA CC05 0084 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 000A 000A 0008 A802 0001 6D02 0042 0000 0000 0000 0000 E700
E0: 0001 6D02 0042 0000 0000 0000 000D E000 0000 0000 0000 0000 FF00 FFFF 390E 0732

Bus : 00 Device: 08 Function : 00 --> 005510DE Vendor : 10DE Device : 0055 (rev F3) - NVIDIA Corporation NVidia nForce 4 SLI IDE Controller
00: 10DE 0055 0007 00B0 85F3 0101 0000 0000 09E1 0000 0BE1 0000 0961 0000 0B61 0000
20: C401 0000 1000 D800 0000 0000 1043 815A 0000 0000 0044 0000 0000 0000 0116 0103
40: 1043 815A 0001 0002 0000 0000 0000 0000 0013 1500 0000 0000 A8A8 20A8 006A 2099
60: 0000 C000 0C51 0000 0F08 4206 0000 0000 782C 40C4 1001 0000 1001 0000 0020 0020
80: 0000 C000 1400 6987 0000 227C 6000 080C 0000 1E74 0000 0000 0006 1006 0000 0101
A0: 0150 7C00 0000 0000 0000 0000 BB33 02AA CC05 0084 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 000A 000A 0008 A802 0001 6D02 0042 0000 0000 0000 0001 E090
E0: 0001 6D02 0042 0000 0000 0000 000F E020 0000 0000 0000 0000 FF00 FFFF 3F0B 0732

Bus : 00 Device: 09 Function : 00 --> 005C10DE Vendor : 10DE Device : 005C (rev F2) - <Unknown device>
00: 10DE 005C 0007 00A0 01F2 0604 0000 0001 0000 0000 0000 0000 0500 8005 00F0 A280
20: FFF0 0000 FFF0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0200
40: 0000 0007 0001 0002 0007 0000 0000 0144 0000 7FFE 0000 0000 1FFF 1FFF 0000 0000
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0C00 0000 F4E0 0016 0000 0000 0008 A800 0000 FEE0 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 10 Function : 00 --> 005710DE Vendor : 10DE Device : 0057 (rev F3) - NVIDIA Corporation nForce4 Ultra NVidia Network Bus Enumerator
00: 10DE 0057 0007 00B8 00F3 0680 0000 0000 0000 D800 B001 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 1043 8141 0000 0000 0044 0000 0000 0000 0117 1401
40: 1043 8141 0001 FE02 0000 0000 000A 1000 6405 0084 0000 0000 0000 0000 0000 0000
60: 0000 0000 0008 A802 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0011 0000 FF40 FFFF 0700 0730

Bus : 00 Device: 11 Function : 00 --> 005D10DE Vendor : 10DE Device : 005D (rev F3) - <Unknown device>
00: 10DE 005D 0007 0010 00F3 0604 0008 0001 0000 0000 0000 0000 0400 0004 01F1 0000
20: FFF0 0000 FFF1 0001 0000 0000 0000 0000 0000 0000 0040 0000 0000 0000 0000 0004
40: 4801 F802 0000 0000 5805 0082 0000 0000 0000 0000 0000 0000 8008 A800 0000 FEE0
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0010 0141 04C0 0000 2810 0000 3421 0301 0000 1041 0C80 0040 01C0 0040 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 12 Function : 00 --> 005D10DE Vendor : 10DE Device : 005D (rev F3) - <Unknown device>
00: 10DE 005D 0007 0010 00F3 0604 0008 0001 0000 0000 0000 0000 0300 0003 01F1 0000
20: FFF0 0000 FFF1 0001 0000 0000 0000 0000 0000 0000 0040 0000 0000 0000 0000 0004
40: 4801 F802 0000 0000 5805 0082 0000 0000 0000 0000 0000 0000 8008 A800 0000 FEE0
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0010 0141 04C0 0000 2810 0000 3421 0201 0000 1041 0C80 0020 01C0 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 13 Function : 00 --> 005D10DE Vendor : 10DE Device : 005D (rev F3) - <Unknown device>
00: 10DE 005D 0007 0010 00F3 0604 0008 0001 0000 0000 0000 0000 0200 0002 9191 2000
20: D000 D2F0 C001 CFF1 0000 0000 0000 0000 0000 0000 0040 0000 0000 0000 0000 0004
40: 4801 F802 0000 0000 5805 0082 0000 0000 0000 0000 0000 0000 8008 A800 0000 FEE0
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0010 0141 04C0 0000 2810 0005 3481 0101 0000 1081 0C80 0010 01C0 0040 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 14 Function : 00 --> 005D10DE Vendor : 10DE Device : 005D (rev A3) - <Unknown device>
00: 10DE 005D 0007 0010 00A3 0604 0008 0001 0000 0000 0000 0000 0100 0001 8181 2000
20: D300 D5F0 B001 BFF1 0000 0000 0000 0000 0000 0000 0040 0000 0000 0000 0000 0008
40: 4801 F802 0000 0000 5805 0082 0000 0000 0000 0000 0000 0000 8008 A800 0000 FEE0
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0010 0141 04C0 0000 2810 0005 3481 0001 0000 1081 0C80 0008 01C0 0040 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 24 Function : 00 --> 11001022 Vendor : 1022 Device : 1100 (rev 00) - Advanced Micro Devices Athlon 64 / Opteron HyperTransport Technology Configuration
00: 1022 1100 0000 0010 0000 0600 0000 0080 0000 0000 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0080 0000 0000 0000 0000 0000
40: 0101 0001 0101 0001 0101 0001 0101 0001 0101 0001 0101 0001 0101 0001 0101 0001
60: 0000 0001 00E4 0000 C820 0F00 000C 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0008 2101 0020 1111 0522 8075 0002 0000 0169 0161 0000 00FF 0007 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 24 Function : 01 --> 11011022 Vendor : 1022 Device : 1101 (rev 00) - Advanced Micro Devices Athlon 64 / Opteron Address Map
00: 1022 1101 0000 0000 0000 0600 0000 0080 0000 0000 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
40: 0003 0000 0000 007F 0000 0000 0001 0000 0000 0000 0002 0000 0000 0000 0003 0000
60: 0000 0000 0004 0000 0000 0000 0005 0000 0000 0000 0006 0000 0000 0000 0007 0000
80: 0003 00E0 FF80 00EF B003 00FE C080 00FE 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0A03 0000 0B00 0000 0003 0080 D300 00FE
C0: 0000 0000 0000 0000 1013 0000 F000 000F 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0003 FF00 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 24 Function : 02 --> 11021022 Vendor : 1022 Device : 1102 (rev 00) - Advanced Micro Devices Athlon 64 / Opteron DRAM Controller
00: 1022 1102 0000 0000 0000 0600 0000 0080 0000 0000 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
40: 0001 0000 2001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
60: DE00 07E0 DE00 07E0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0007 0000 0000 0000 3121 0253 0A30 0000 8E80 2805 8807 3E5B 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 E875 B2BE 005B 0000 FDDE 0000 367C 203F
C0: 0000 0000 0000 0000 0000 0000 0000 0000 4187 31BB 42C6 0983 0009 0E33 4D46 A408
E0: 816B 012B 0748 A92A 2446 6846 12AC 8CD3 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 00 Device: 24 Function : 03 --> 11031022 Vendor : 1022 Device : 1103 (rev 00) - Advanced Micro Devices Athlon 64 / Opteron Miscellaneous Control
00: 1022 1103 0000 0000 0000 0600 0000 0080 0000 0000 0000 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
40: 3BFF 0000 0040 0800 0000 0000 0000 0000 7E70 D82E 00C6 0000 0000 0000 0FC0 B686
60: 00F4 0000 0000 0000 0000 0000 0000 0000 0111 5102 8011 5000 3800 0800 221A 0000
80: 0000 2307 2113 2113 0000 0000 0000 0000 0000 0000 20B8 0000 3020 2E80 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 003E 4000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 A701 000D 0000 0000 2020 0020
E0: 0000 0000 0C20 0E52 1119 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 01 Device: 00 Function : 00 --> 029110DE Vendor : 10DE Device : 0291 (rev A1) - NVIDIA Corporation 0x0401 BLISS GeForce 7900 GT bios
00: 10DE 0291 0007 0010 00A1 0300 0008 0000 0000 D300 000C B000 0000 0000 0004 D400
20: 0000 0000 8001 0000 0000 0000 107D 2A62 0000 0000 0060 0000 0000 0000 0112 0000
40: 0000 0000 0000 0000 0000 0000 0000 0000 0001 0000 0001 0000 D6CE 0023 0000 0000
60: 6801 0002 0000 0000 7805 0080 0000 0000 0000 0000 0000 0000 0010 0001 0500 0064
80: 2810 000A 4D01 0001 0008 1081 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 02 Device: 00 Function : 00 --> 029110DE Vendor : 10DE Device : 0291 (rev A1) - NVIDIA Corporation 0x0401 BLISS GeForce 7900 GT bios
00: 10DE 0291 0006 0010 00A1 0300 0008 0000 0000 D200 000C C000 0000 0000 0004 D100
20: 0000 0000 9C81 0000 0000 0000 0000 0000 0000 0000 0060 0000 0000 0000 0113 0000
40: 0000 0000 0000 0000 0000 0000 0000 0000 0001 0000 0001 0000 D6CE 0023 0000 0000
60: 6801 0002 0000 0000 7805 0080 0000 0000 0000 0000 0000 0000 0010 0001 0500 0064
80: 2810 000A 4D01 0101 0008 1081 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 05 Device: 08 Function : 00 --> 17241412 Vendor : 1412 Device : 1724 (rev 01) - IC Ensemble, Inc. VT1720/24 Envy24PT/HT PCI Multi-Channel Audio Controller
00: 1412 1724 0005 0210 0001 0401 2000 0000 A001 0000 A401 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 1412 3630 0000 0000 0080 0000 0000 0000 0112 0000
40: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0001 0401 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Bus : 05 Device: 12 Function : 00 --> 432011AB Vendor : 11AB Device : 4320 (rev 13) - Marvell Semiconductor 88E8053 PCI E gigabit
00: 11AB 4320 0007 02B0 0013 0200 2008 0000 0000 D700 A801 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 1043 811A 0000 D600 0048 0000 0000 0000 0111 1F17
40: 0000 05F0 8000 01A0 5001 FE02 2E00 0C00 0003 8000 0000 0000 0000 0004 0000 0000
60: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
80: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000


*****************************

ISA Dump from address $290 --> <IT8712F-I> (ISA at $0290) (No error)
00: 11 00 FF 00 00 00 00 00 00 00 3F 5B 00 A2 7C 9C   ..........?[..|.
10: FF FF FF 73 00 46 4C 40 00 00 00 FF FF FF FF FF   ...s.FL@........
20: 45 00 C9 B5 BB B8 00 B4 C0 21 22 1E D3 81 81 81   E........!".....
30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
40: FF FF FF FF FF FF FF FF 2D FF FF FF FF FF FF FF   ........-.......
50: FF 38 7F 7F 24 FF 5D 5D 90 5D FF 12 00 00 00 00   .8..$.]].]......
60: 7F 7F 7F 00 00 7F FF FF 7F 7F 7F 00 00 7F FF FF   ................
70: 7F 7F 7F 00 00 7F FF FF FF FF FF FF FF FF FF FF   ................
80: 00 00 00 00 FF FF FF FF 40 40 FF FF FF FF FF FF   ........@@......
90: 7F 7F 7F 00 00 7F FF FF 7F 7F 7F 00 00 7F FF FF   ................
A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................

*****************************

SMB Dump from address $50 --> <RAM> (SMBus at $4C00) (No error)
00: 80 08 07 0D 0B 02 40 00 04 50 70 00 82 08 00 01   ......@..Pp.....
10: 0E 04 04 01 02 20 C0 00 00 00 00 28 28 3C 19 80   ..... .....((<..
20: 60 60 40 40 00 00 00 00 00 00 00 00 00 00 00 00   ``@@............
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 97   ................
40: 7F 7F 7F 7F B0 00 00 00 00 4F 43 5A 34 30 30 32   .........OCZ4002
50: 30 34 38 45 4C 44 43 50 45 2D 4B 00 00 00 00 00   048ELDCPE-K.....
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
80: 05 09 14 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
SMB Dump from address $51 --> <RAM> (SMBus at $4C00) (No error)
00: 80 08 07 0D 0B 02 40 00 04 50 70 00 82 08 00 01   ......@..Pp.....
10: 0E 04 04 01 02 20 C0 00 00 00 00 28 28 3C 19 80   ..... .....((<..
20: 60 60 40 40 00 00 00 00 00 00 00 00 00 00 00 00   ``@@............
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 97   ................
40: 7F 7F 7F 7F B0 00 00 00 00 4F 43 5A 34 30 30 32   .........OCZ4002
50: 30 34 38 45 4C 44 43 50 45 2D 4B 00 00 00 00 00   048ELDCPE-K.....
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
80: 05 09 14 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
SMB Dump from address $2F --> <Unknown> (SMBus at $4C40) (No error)
00: 00 00 00 00 00 00 00 00 00 80 20 01 01 00 00 FF   .......... .....
10: 00 00 7F 00 00 10 00 00 00 00 00 00 00 00 00 FE   ................
20: 04 01 CB B9 01 01 01 7F FF FF FF 7E 68 00 00 ED   ...........~h...
30: B0 01 12 11 42 88 C6 48 D7 22 08 F9 00 01 FF FF   ....B..H."......
40: 01 32 20 00 00 00 00 50 2F 10 01 44 01 95 80 5C   .2 ....P/..D...\
50: FF FF FF FF FF FF 00 80 72 70 FF 00 00 00 05 FF   ........rp......
60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
80: 01 FF 01 FF 00 00 00 00 01 01 01 01 3C 3C 0A 0A   ............<<..
90: 00 00 00 01 FF 00 00 00 01 01 3C 18 00 00 01 01   ..........<.....
A0: FF FF FF 00 00 00 00 00 15 FB 6F 18 00 FF FF FF   ..........o.....
B0: B9 40 01 FF 05 88 3A 4A 01 30 FF FF 2C 18 FF FF   .@....:J.0..,...
C0: 7F 00 00 4B 00 50 00 FF 7F 00 00 4B 00 50 00 FF   ...K.P.....K.P..
D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   ................
F0: FF FF 00 FF 00 01 00 FF FF 02 FF 00 00 36 FF 2F   .............6./
SMB Dump from address $48 --> <LM75> (SMBus at $4C40) (No error)
00: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
10: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
20: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
30: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
40: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
50: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
60: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
70: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
80: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
90: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
A0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
B0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
C0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
D0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
E0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
F0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
SMB Dump from address $49 --> <LM75> (SMBus at $4C40) (No error)
00: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
10: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
20: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
30: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
40: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
50: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
60: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
70: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
80: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
90: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
A0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
B0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
C0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
D0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
E0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
F0: 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50 7F 00 4B 50   ..KP..KP..KP..KP
SMB Device at address $61 --> (SMBus at $4C40) (No error)

*****************************

Retry attempts info for SMBus at $4C00
  [ -1]=174
  [  0]=174
Retry attempts info for SMBus at $4C40
  [ -1]=173
  [  0]=173
  [  1]=1

*****************************

Pause stats for SMBusnForce2@$4C00: min=49999 max=50000 avg=49999(2673) touts=174 count=2847
Pause stats for SMBusnForce2@$4C40: min=49999 max=50000 avg=49999(3591) touts=174 count=3765

*****************************

Scanning SMBus at $4C00...
Decoding DIMM #0
 Memory type is DDR
 Module Rows : 2
 Levels : 2.5V
 Parity : NO PARITY
 Refresh Rate : 7.8us
 Total Size : 1024MB
Decoding DIMM #1
 Memory type is DDR
 Module Rows : 2
 Levels : 2.5V
 Parity : NO PARITY
 Refresh Rate : 7.8us
 Total Size : 1024MB
Scanning SMBus at $4C40...


*****************************



*****************************

Can change fan speeds : YES
Can smoothly change fan speeds : YES
Can stop fans : YES

*****************************

WMI interface is registered : ON
MB manufacturer: ASUSTeK Computer INC.
MB model: A8N-SLI Premium
MB version: 1.02    
ACPI temp: 40,0
ACPI active trip point: 0,0
ACPI passive trip point: 73,0
ACPI critical trip point: 75,0
WMI quick analysis results -->
EXPLORING : root\CIMV2\Win32_BaseBoard
  -> Object Start
  Caption = Base Board
  CreationClassName = Win32_BaseBoard
  Description = Base Board
  HostingBoard = True
  Manufacturer = ASUSTeK Computer INC.
  Name = Base Board
  PoweredOn = True
  Product = A8N-SLI Premium
  SerialNumber = 123456789000
  Tag = Base Board
  Version = 1.02    
  Method -> IsCompatible(ElementToCheck)
EXPLORING : root\WMI\msacpi_thermalzonetemperature
  -> Object Start
  Active = True
  ActiveTripPoint =  0 0 0 0 0 0 0 0 0 (0,0C)
  ActiveTripPointCount = 1
  CriticalTripPoint = 3482 (75,0C)
  CurrentTemperature = 3132 (40,0C)
  InstanceName = ACPI\ThermalZone\THRM_0
  PassiveTripPoint = 3462 (73,0C)
  Reserved = 1
  SamplingPeriod = 60
  ThermalConstant1 = 4
  ThermalConstant2 = 3
  ThermalStamp = 6
EXPLORING : root\CIMV2\CIM_AssociatedSensor
EXPLORING : root\CIMV2\CIM_CoolingDevice
EXPLORING : root\CIMV2\CIM_Fan
EXPLORING : root\CIMV2\CIM_HeatPipe
EXPLORING : root\CIMV2\CIM_ManagementController
EXPLORING : root\CIMV2\CIM_NumericSensor
EXPLORING : root\CIMV2\CIM_PackageAlarm
EXPLORING : root\CIMV2\CIM_PackageCooling
EXPLORING : root\CIMV2\CIM_Refrigeration
EXPLORING : root\CIMV2\CIM_Sensor
EXPLORING : root\CIMV2\CIM_Tachometer
EXPLORING : root\CIMV2\CIM_TemperatureSensor
EXPLORING : root\CIMV2\CIM_VoltageSensor
EXPLORING : root\CIMV2\Win32_CurrentProbe
EXPLORING : root\CIMV2\Win32_Fan
EXPLORING : root\CIMV2\Win32_HeatPipe
EXPLORING : root\CIMV2\Win32_Refrigeration
EXPLORING : root\CIMV2\Win32_TemperatureProbe
EXPLORING : root\CIMV2\Win32_VoltageProbe
EXPLORING : SMBIOS
  -> Object Start
<-- End of WMI quick analysis results

*****************************

DMI structures from SMBIOS ver. 2.3
MBManufacturer : ASUSTeK Computer INC.
MBModel : A8N-SLI Premium
MBVersion : 1.02
BIOSVendor : Phoenix Technologies, LTD
BIOSVersion : ASUS A8N-SLI Premium ACPI BIOS Revision 1303
Structure   0 - 0000 - fixed len is 16 bytes -> BIOS information
  -> 01 02 00 E0 03 07 80 9E CB 7F 00 00 00 00 33 01
  -> 'Phoenix Technologies, LTD'
  -> 'ASUS A8N-SLI Premium ACPI BIOS Revision 1303'
  -> '08/10/2006'
Structure   1 - 0001 - fixed len is 21 bytes -> System information
  -> 01 02 03 04 20 15 7C 15 CB 5B D9 11 AF 56 00 15 F2 78 29 70 06
  -> 'System manufacturer'
  -> 'System Product Name'
  -> 'System Version'
  -> 'System Serial Number'
Structure   2 - 0002 - fixed len is 4 bytes -> Base board (or module) information
  -> 01 02 03 04
  -> 'ASUSTeK Computer INC.'
  -> 'A8N-SLI Premium'
  -> '1.02    '
  -> '123456789000'
Structure   3 - 0003 - fixed len is 13 bytes -> System enclosure or chassis
  -> 01 03 02 03 04 03 03 03 03 01 00 00 00
  -> 'Chassis Manufacture'
  -> 'Chassis Version'
  -> 'EVAL          '
  -> '123456789000'

*****************************

0 events defined

*****************************

Tray icon size : 16x16
UPTIME : 0 days 00:47:11

*****************************

Win9x:NO  64Bit:NO  GiveIO:YES  SpeedFan:YES
I/O properly initialized
Linked ISA BUS at $0290
Linked nVidia nForce4 SMBUS at $4C00
Linked nVidia nForce4 SMBUS at $4C40
Scanning ISA BUS at $0290...
IT8712F(I) found on ISA at $290
SuperIO Chip=IT8712F(I)
Scanning nForce2 SMBus at $4C00...
Scanning nForce2 SMBus at $4C40...
Unknown Winbond1=$5CA3 ID=$72 on SMBus at $2F
Unknown Winbond2=$9501 ID=$80 on SMBus at $2F
LM75 found on SMBus at $48
LM75 found on SMBus at $49
SMART Enabled for drive 0
Found Maxtor 6V300F0 (300,1GB)
SMART Enabled for drive 1
Found SAMSUNG HD501LJ (500,1GB)
SMART Enabled for drive 2
Found Maxtor 6V320F0 (320,1GB)
SMART Enabled for drive 3
Found Maxtor 6V300F0 (300,1GB)
Found ACPI temperature (40,0C)
End of detection
Loaded 0 events
SMBus msg : SMB Error $49 : Busy (1A)


*****************************

Win9x:NO  64Bit:NO  GiveIO:YES  SpeedFan:YES
SpeedFan.sys ver. 1.002
  -> Can read memory
  -> Can read MSR
About to do a test on INTEL MSRs...
End of INTEL MSR test
I/O properly initialized
Linked ISA BUS at $0290
Linked PCI
Starting PCI scan...
Linked nVidia nForce4 SMBUS at $4C00
nForce2 SMBus at $4C00 returned <No error>
Linked nVidia nForce4 SMBUS at $4C40
SMBus at $4C40 WRITEQ failed ($0A)
nForce2 SMBus at $4C40 returned <no ack>
PCI scan done!
Scanning ISA BUS at $0290...
About to check DELL support
PCI scanning is enabled
End of DELL support check
IT8712F(I) found on ISA at $290
 -> Temperature sensor diode 1 : Thermistor
 -> Temperature sensor diode 2 : Thermistor
 -> Temperature sensor diode 3 : Thermistor
 -> FAN1 divisor : 8
 -> FAN2 divisor : 8
 -> FAN3 divisor : 8
 -> PWM 1 mode : ON/OFF
 -> PWM 2 mode : ON/OFF
 -> PWM 3 mode : ON/OFF
 -> PWM 4 mode : Software controlled
 -> PWM 5 mode : Software controlled
 -> PWMOUT clock : 48M
 -> Temperature 1 offset : 0
 -> Temperature 2 offset : 0
 -> Temperature 3 offset : 0
 -> FAN1 mult : 1
 -> FAN1 div : 1
 -> FAN2 mult : 1
 -> FAN2 div : 1
 -> FAN3 mult : 1
 -> FAN3 div : 1
 -> FAN4 mult : 1
 -> FAN4 div : 1
 -> FAN5 mult : 1
 -> FAN5 div : 1
 -> Reverse PWM01 logic : OFF
 -> Reverse PWM02 logic : OFF
 -> Reverse PWM03 logic : OFF
 -> Reverse PWM04 logic : OFF
 -> Reverse PWM05 logic : OFF
Second pass...
ITE r[$20]=$87 r[$21]=$12 r[$22]=$07 r[$07]=$01 
NEW --> SuperIO chip=ITE IT8712F(I) ($002E)
Checking $0370 for SMSC (2)...
Checking $0370 for SMSC (1)...
Checking $03F0 for SMSC (2)...
Checking $03F0 for SMSC (1)...
Checking $002E for SMSC (1)...
Registers [$002E] : $87 $12 $00 $00
Checking $004E for SMSC (1)...
Checking $002E for WINBOND...
$002E --> Device ID=$87 Revision=$12
Checking $004E for WINBOND...
Checking $0250 for WINBOND...
Checking $0370 for WINBOND...
Checking $03F0 for WINBOND...
Checking $002E for NS...
Checking $004E for NS...
Checking $002E for ITE (1)...
Registers [$002E] : $87 $12 $07
SuperIO Chip=IT8712F(I)
 --> [$25]=$06
 --> [$26]=$00
 --> [$27]=$21
 --> [$28]=$C0
 --> [$29]=$00
 --> [$2A]=$06
 --> LDN0 [$60]=$03F0 [$62]=$0000 [$64]=$0000 (enabled)
 --> LDN1 [$60]=$03F8 [$62]=$0000 [$64]=$0000 (disabled)
 --> LDN2 [$60]=$0000 [$62]=$0000 [$64]=$0000 (disabled)
 --> LDN3 [$60]=$0378 [$62]=$0778 [$64]=$0080 (enabled)
 --> LDN4 [$60]=$0290 [$62]=$0000 [$64]=$0000 (enabled)
 --> LDN5 [$60]=$0060 [$62]=$0064 [$64]=$0000 (enabled)
 --> LDN6 [$60]=$0000 [$62]=$0000 [$64]=$0000 (disabled)
 --> LDN7 [$60]=$0000 [$62]=$0800 [$64]=$0000 (disabled)
 --> LDN8 [$60]=$0330 [$62]=$0000 [$64]=$0000 (enabled)
 --> LDN9 [$60]=$0201 [$62]=$0000 [$64]=$0000 (enabled)
 --> LDNA [$60]=$0310 [$62]=$0000 [$64]=$0000 (disabled)
 --> LDNB [$60]=$0000 [$62]=$0000 [$64]=$0000 (disabled)
Scanning nForce2 SMBus at $4C00...
Something is at address $50
Scanning nForce2 SMBus at $4C40...
Something is at address $2F
 - false LM80 at $2F as it hasn't register redundancy
Unknown Winbond1=$5CA3 ID=$72 on SMBus at $2F
Unknown Winbond2=$9501 ID=$80 on SMBus at $2F
Something is at address $48
LM75 found on SMBus at $48
 -> Temperature 1 offset : 0
Something is at address $49
LM75 found on SMBus at $49
 -> Temperature 1 offset : 0
About to probe TOSHIBA SUPPORT...
End of TOSHIBA SUPPORT probing
Version 1.1 04 00000007
SMART Enabled for drive 0
 --> S.M.A.R.T. attributes properly read
 --> S.M.A.R.T. thresholds properly read
Start of DEBUG DATA for drive 0
--> cylinders : 581463
--> tracks per cilinder : 16
--> sectors per track : 63
--> bytes per sector : 512
--> disk size : 300,1
End of DEBUG DATA for drive 0
Found Maxtor 6V300F0 (300,1GB)
Found Maxtor 6V300F0 Firmware revision <VA111630> (300,1GB) Serial <V60057TG>
 --> ATA device
 --> Fixed Drive
 --> S.M.A.R.T. Supported (enabled)
 --> Power Management Supported (enabled)
 --> Advanced Power Management Supported (disabled)
 --> Automatic Acoustic Management Supported (Current:$FE  Reccomended:$C0)
 --> 48-bit Addressing ($6690 $22EF $0000 $0000)
 --> UDMA Mode 0 Supported
 --> UDMA Mode 1 Supported
 --> UDMA Mode 2 Supported
 --> UDMA Mode 3 Supported
 --> UDMA Mode 4 Supported
 --> UDMA Mode 5 Supported
 --> UDMA Mode 6 Supported
 --> UDMA Mode 6 Active
SMART Structure Revision : $0020
ID=$03  NAME=Spin Up Time  VALUE=$BC  WORST=$BC  RAW=$000000003C24  THRSHLD=$3F  FLAGS=$0027
ID=$04  NAME=Start/Stop Count  VALUE=$FD  WORST=$FD  RAW=$00000000067C  THRSHLD=$00  FLAGS=$0032
ID=$05  NAME=Reallocated Sector Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$3F  FLAGS=$0033
ID=$07  NAME=Seek Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$08  NAME=Seek Time Performance  VALUE=$FA  WORST=$F1  RAW=$00000000C411  THRSHLD=$BB  FLAGS=$0027
ID=$09  NAME=Power On Hours Count  VALUE=$F3  WORST=$F3  RAW=$000000000DEE  THRSHLD=$00  FLAGS=$0032
ID=$0A  NAME=Spin Retry Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$9D  FLAGS=$002B
ID=$0B  NAME=Calibration Retry Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$DF  FLAGS=$002B
ID=$0C  NAME=Power Cycle Count  VALUE=$F9  WORST=$F9  RAW=$0000000006B8  THRSHLD=$00  FLAGS=$0032
ID=$BD  NAME=(Unknown Attribute)  VALUE=$64  WORST=$64  RAW=$000000000000  THRSHLD=$00  FLAGS=$003A
ID=$BE  NAME=(Unknown Attribute)  VALUE=$42  WORST=$34  RAW=$000022130022  THRSHLD=$00  FLAGS=$0022
ID=$C0  NAME=Power Off Retract Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$C1  NAME=Load Cycle Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$C2  NAME=Temperature  VALUE=$22  WORST=$FD  RAW=$000000000022  THRSHLD=$00  FLAGS=$0032
Current HD temperature is 34C
ID=$C3  NAME=Hardware ECC Recovered  VALUE=$FD  WORST=$FC  RAW=$000000000AC0  THRSHLD=$00  FLAGS=$000A
ID=$C4  NAME=Reallocated Event Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C5  NAME=Current Pending Sector  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C6  NAME=Offline Correctable  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C7  NAME=UltraATA CRC Error Rate  VALUE=$C7  WORST=$C7  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C8  NAME=Write Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$C9  NAME=Soft Read Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CA  NAME=TA Increase Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CB  NAME=Run Out Cancel  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$B4  FLAGS=$000B
ID=$CC  NAME=Shock Count Write Opern  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CD  NAME=Shock Rate Write Opern  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CF  NAME=Spin High Current  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$002A
ID=$D0  NAME=Spin Buzz  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$002A
ID=$D2  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$D3  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$D4  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
Linked S.M.A.R.T.
 -> Temperature 1 offset : 0
Version 1.1 04 00000007
SMART Enabled for drive 1
 --> S.M.A.R.T. attributes properly read
 --> S.M.A.R.T. thresholds properly read
Start of DEBUG DATA for drive 1
--> cylinders : 60801
--> tracks per cilinder : 255
--> sectors per track : 63
--> bytes per sector : 512
--> disk size : 500,1
End of DEBUG DATA for drive 1
Found SAMSUNG HD501LJ (500,1GB)
Found SAMSUNG HD501LJ Firmware revision <CR100-10> (500,1GB) Serial <S0MUJ1KP317877>
 --> ATA device
 --> Fixed Drive
 --> S.M.A.R.T. Supported (enabled)
 --> Power Management Supported (enabled)
 --> Automatic Acoustic Management Supported (disabled)
 --> 48-bit Addressing ($6030 $3A38 $0000 $0000)
 --> UDMA Mode 0 Supported
 --> UDMA Mode 1 Supported
 --> UDMA Mode 2 Supported
 --> UDMA Mode 3 Supported
 --> UDMA Mode 4 Supported
 --> UDMA Mode 5 Supported
 --> UDMA Mode 6 Supported
 --> UDMA Mode 7 Supported
 --> UDMA Mode 6 Active
SMART Structure Revision : $0010
ID=$01  NAME=Raw Read Error Rate  VALUE=$FD  WORST=$64  RAW=$000000000000  THRSHLD=$33  FLAGS=$000F
ID=$03  NAME=Spin Up Time  VALUE=$64  WORST=$64  RAW=$000000001C40  THRSHLD=$0F  FLAGS=$0007
ID=$04  NAME=Start/Stop Count  VALUE=$64  WORST=$64  RAW=$0000000002D0  THRSHLD=$00  FLAGS=$0032
ID=$05  NAME=Reallocated Sector Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$0A  FLAGS=$0033
ID=$07  NAME=Seek Error Rate  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$33  FLAGS=$000F
ID=$08  NAME=Seek Time Performance  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$0F  FLAGS=$0025
ID=$09  NAME=Power On Hours Count  VALUE=$64  WORST=$64  RAW=$000000000642  THRSHLD=$00  FLAGS=$0032
ID=$0A  NAME=Spin Retry Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$33  FLAGS=$0033
ID=$0B  NAME=Calibration Retry Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0012
ID=$0C  NAME=Power Cycle Count  VALUE=$64  WORST=$64  RAW=$000000000296  THRSHLD=$00  FLAGS=$0032
ID=$BB  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$BC  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$BE  NAME=(Unknown Attribute)  VALUE=$48  WORST=$3E  RAW=$00000000001C  THRSHLD=$00  FLAGS=$0022
ID=$C2  NAME=Temperature  VALUE=$9A  WORST=$7C  RAW=$00000000001C  THRSHLD=$00  FLAGS=$0022
Current HD temperature is 28C
ID=$C3  NAME=Hardware ECC Recovered  VALUE=$64  WORST=$64  RAW=$00000000667C  THRSHLD=$00  FLAGS=$001A
ID=$C4  NAME=Reallocated Event Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$C5  NAME=Current Pending Sector  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0012
ID=$C6  NAME=Offline Correctable  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0030
ID=$C7  NAME=UltraATA CRC Error Rate  VALUE=$C8  WORST=$C8  RAW=$000000000000  THRSHLD=$00  FLAGS=$003E
ID=$C8  NAME=Write Error Rate  VALUE=$FD  WORST=$64  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$C9  NAME=Soft Read Error Rate  VALUE=$FD  WORST=$64  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CA  NAME=TA Increase Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
 -> Temperature 1 offset : 0
Version 1.1 04 00000007
SMART Enabled for drive 2
 --> S.M.A.R.T. attributes properly read
 --> S.M.A.R.T. thresholds properly read
Start of DEBUG DATA for drive 2
--> cylinders : 38913
--> tracks per cilinder : 255
--> sectors per track : 63
--> bytes per sector : 512
--> disk size : 320,1
End of DEBUG DATA for drive 2
Found Maxtor 6V320F0 (320,1GB)
Found Maxtor 6V320F0 Firmware revision <VA111900> (320,1GB) Serial <V60LFRHG>
 --> ATA device
 --> Fixed Drive
 --> S.M.A.R.T. Supported (enabled)
 --> Power Management Supported (enabled)
 --> Advanced Power Management Supported (disabled)
 --> Automatic Acoustic Management Supported (Current:$FE  Reccomended:$C0)
 --> 48-bit Addressing ($EAB0 $2542 $0000 $0000)
 --> UDMA Mode 0 Supported
 --> UDMA Mode 1 Supported
 --> UDMA Mode 2 Supported
 --> UDMA Mode 3 Supported
 --> UDMA Mode 4 Supported
 --> UDMA Mode 5 Supported
 --> UDMA Mode 6 Supported
 --> UDMA Mode 6 Active
SMART Structure Revision : $0020
ID=$03  NAME=Spin Up Time  VALUE=$BD  WORST=$BC  RAW=$000000003990  THRSHLD=$3F  FLAGS=$0027
ID=$04  NAME=Start/Stop Count  VALUE=$FD  WORST=$FD  RAW=$000000000648  THRSHLD=$00  FLAGS=$0032
ID=$05  NAME=Reallocated Sector Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$3F  FLAGS=$0033
ID=$07  NAME=Seek Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$08  NAME=Seek Time Performance  VALUE=$F8  WORST=$EF  RAW=$00000000C928  THRSHLD=$BB  FLAGS=$0027
ID=$09  NAME=Power On Hours Count  VALUE=$F4  WORST=$F4  RAW=$000000000D72  THRSHLD=$00  FLAGS=$0032
ID=$0A  NAME=Spin Retry Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$9D  FLAGS=$002B
ID=$0B  NAME=Calibration Retry Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$DF  FLAGS=$002B
ID=$0C  NAME=Power Cycle Count  VALUE=$F9  WORST=$F9  RAW=$00000000063E  THRSHLD=$00  FLAGS=$0032
ID=$BD  NAME=(Unknown Attribute)  VALUE=$64  WORST=$64  RAW=$000000000000  THRSHLD=$00  FLAGS=$003A
ID=$BE  NAME=(Unknown Attribute)  VALUE=$41  WORST=$36  RAW=$000023130023  THRSHLD=$00  FLAGS=$0022
ID=$C0  NAME=Power Off Retract Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$C1  NAME=Load Cycle Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$C2  NAME=Temperature  VALUE=$24  WORST=$FD  RAW=$000000000023  THRSHLD=$00  FLAGS=$0032
Current HD temperature is 35C
ID=$C3  NAME=Hardware ECC Recovered  VALUE=$FD  WORST=$FC  RAW=$00000000057D  THRSHLD=$00  FLAGS=$000A
ID=$C4  NAME=Reallocated Event Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C5  NAME=Current Pending Sector  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C6  NAME=Offline Correctable  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C7  NAME=UltraATA CRC Error Rate  VALUE=$C7  WORST=$C7  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C8  NAME=Write Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$C9  NAME=Soft Read Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CA  NAME=TA Increase Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CB  NAME=Run Out Cancel  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$B4  FLAGS=$000B
ID=$CC  NAME=Shock Count Write Opern  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CD  NAME=Shock Rate Write Opern  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CF  NAME=Spin High Current  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$002A
ID=$D0  NAME=Spin Buzz  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$002A
ID=$D2  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$D3  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$D4  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
 -> Temperature 1 offset : 0
Version 1.1 04 00000007
SMART Enabled for drive 3
 --> S.M.A.R.T. attributes properly read
 --> S.M.A.R.T. thresholds properly read
Start of DEBUG DATA for drive 3
--> cylinders : 36483
--> tracks per cilinder : 255
--> sectors per track : 63
--> bytes per sector : 512
--> disk size : 300,1
End of DEBUG DATA for drive 3
Found Maxtor 6V300F0 (300,1GB)
Found Maxtor 6V300F0 Firmware revision <VA111630> (300,1GB) Serial <V6001CPG>
 --> ATA device
 --> Fixed Drive
 --> S.M.A.R.T. Supported (enabled)
 --> Power Management Supported (enabled)
 --> Advanced Power Management Supported (disabled)
 --> Automatic Acoustic Management Supported (Current:$FE  Reccomended:$C0)
 --> 48-bit Addressing ($6690 $22EF $0000 $0000)
 --> UDMA Mode 0 Supported
 --> UDMA Mode 1 Supported
 --> UDMA Mode 2 Supported
 --> UDMA Mode 3 Supported
 --> UDMA Mode 4 Supported
 --> UDMA Mode 5 Supported
 --> UDMA Mode 6 Supported
 --> UDMA Mode 6 Active
SMART Structure Revision : $0020
ID=$03  NAME=Spin Up Time  VALUE=$BD  WORST=$BB  RAW=$000000005590  THRSHLD=$3F  FLAGS=$0027
ID=$04  NAME=Start/Stop Count  VALUE=$FC  WORST=$FC  RAW=$00000000088A  THRSHLD=$00  FLAGS=$0032
ID=$05  NAME=Reallocated Sector Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$3F  FLAGS=$0033
ID=$07  NAME=Seek Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$08  NAME=Seek Time Performance  VALUE=$F7  WORST=$F3  RAW=$00000000E723  THRSHLD=$BB  FLAGS=$0027
ID=$09  NAME=Power On Hours Count  VALUE=$F1  WORST=$F1  RAW=$000000001123  THRSHLD=$00  FLAGS=$0032
ID=$0A  NAME=Spin Retry Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$9D  FLAGS=$002B
ID=$0B  NAME=Calibration Retry Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$DF  FLAGS=$002B
ID=$0C  NAME=Power Cycle Count  VALUE=$F7  WORST=$F7  RAW=$000000000947  THRSHLD=$00  FLAGS=$0032
ID=$BD  NAME=(Unknown Attribute)  VALUE=$64  WORST=$64  RAW=$000000000000  THRSHLD=$00  FLAGS=$003A
ID=$BE  NAME=(Unknown Attribute)  VALUE=$44  WORST=$34  RAW=$000020130020  THRSHLD=$00  FLAGS=$0022
ID=$C0  NAME=Power Off Retract Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$C1  NAME=Load Cycle Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$C2  NAME=Temperature  VALUE=$22  WORST=$FD  RAW=$000000000020  THRSHLD=$00  FLAGS=$0032
Current HD temperature is 32C
ID=$C3  NAME=Hardware ECC Recovered  VALUE=$FD  WORST=$FC  RAW=$0000000007CB  THRSHLD=$00  FLAGS=$000A
ID=$C4  NAME=Reallocated Event Count  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C5  NAME=Current Pending Sector  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C6  NAME=Offline Correctable  VALUE=$FD  WORST=$FD  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C7  NAME=UltraATA CRC Error Rate  VALUE=$C7  WORST=$C7  RAW=$000000000000  THRSHLD=$00  FLAGS=$0008
ID=$C8  NAME=Write Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$C9  NAME=Soft Read Error Rate  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CA  NAME=TA Increase Count  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CB  NAME=Run Out Cancel  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$B4  FLAGS=$000B
ID=$CC  NAME=Shock Count Write Opern  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CD  NAME=Shock Rate Write Opern  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$000A
ID=$CF  NAME=Spin High Current  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$002A
ID=$D0  NAME=Spin Buzz  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$002A
ID=$D2  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$D3  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
ID=$D4  NAME=(Unknown Attribute)  VALUE=$FD  WORST=$FC  RAW=$000000000000  THRSHLD=$00  FLAGS=$0032
 -> Temperature 1 offset : 0
About to probe SCSI...
End of SCSI probing
About to probe UGURU support...
Motherboard is ASUSTeK Computer INC. A8N-SLI Premium
End of UGURU support probing
About to probe ACPI temperatures...
Found ACPI temperature (40,0C)
 -> Temperature 1 offset : 0
End of ACPI temperatures probing
About to probe AMD Internal Sensors...
Found AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ internal sensor for K8 CPU#0 : 42C
 -> TCaseMax=63
 -> Core=0
 -> Sensor=0
 -> Offset=12
 -> Temperature 1 offset : 0
End of AMD Internal Sensors probing
About to probe INTEL Internal Sensors...
End of INTEL Internal Sensors probing
About to probe NVIDIA ControlPanel Sensors...
Thermal settings for monitor 0 are: CORE=46  AMBIENT=0  LIMIT=130
Linked NVCPL
 -> Temperature 1 offset : 0
 -> Temperature 2 offset : 0
Thermal settings for monitor 1 are: CORE=46  AMBIENT=0  LIMIT=130
End of NVIDIA ControlPanel Sensors probing
End of detection
Reading Cfg Version 2.01
Old sensor properly detected -->
  IT8712F-I on ISA @ $290
PROP PWM 2 mode (14) = Software controlled
PROP PWM 1 mode (13) = Software controlled
Old sensor properly detected -->
  LM75 on nForce2 SMBus @ $48
Old sensor properly detected -->
  LM75 on nForce2 SMBus @ $49
Old sensor properly detected -->
  HD0 (300,1GB) on SMART @ $0
Old sensor properly detected -->
  HD1 (500,1GB) on SMART @ $1
Old sensor properly detected -->
  HD2 (320,1GB) on SMART @ $2
Old sensor properly detected -->
  HD3 (300,1GB) on SMART @ $3
Old sensor properly detected -->
  ACPI on ISA @ $0
Old sensor properly detected -->
  AMD K8 on PCI @ $0
Old sensor properly detected -->
  NVidia Video Card on NVCPL @ $0
PWM from IT8712F-I@$290(onISA@$290) -->
  Speed01 45 70
  properly added
PWM from IT8712F-I@$290(onISA@$290) -->
  Speed02 40 65
  properly added
PWM from IT8712F-I@$290(onISA@$290) -->
  Speed03 0 100
  properly added
PWM from IT8712F-I@$290(onISA@$290) -->
  Speed04 0 100
  properly added
PWM from IT8712F-I@$290(onISA@$290) -->
  Speed05 0 100
  properly added
Temperature from IT8712F-I@$290(onISA@$290) -->
  Temp1 40 50 0
  properly added
Temperature from IT8712F-I@$290(onISA@$290) -->
  Temp2 40 50 0
  properly added
Temperature from IT8712F-I@$290(onISA@$290) -->
  Temp3 40 50 0
  properly added
Temperature from LM75@$48(onSMBusnForce2@$4C40) -->
  Temp 40 50 0
  properly added
Temperature from LM75@$49(onSMBusnForce2@$4C40) -->
  Temp 40 50 0
  properly added
Temperature from Maxtor 6V300F0V60057TG -->
  HD0 40 50 0
  properly added
Temperature from SAMSUNG HD501LJS0MUJ1KP317877 -->
  HD1 40 50 0
  properly added
Temperature from Maxtor 6V320F0V60LFRHG -->
  HD2 40 50 0
  properly added
Temperature from Maxtor 6V300F0V6001CPG -->
  HD3 40 50 0
  properly added
Temperature from ACPI -->
  Temp1 40 50 0
  properly added
Temperature from AMD K8@$0(onPCI@$0) -->
  Core 52 58 0
  PWM 1 from 0
  properly added
Temperature from NVidia Video Card@$0(onNVCPL@$0) -->
  7900 56 70 0
  PWM 2 from 0
  properly added
Temperature from NVidia Video Card@$0(onNVCPL@$0) -->
  Ambient 40 50 0
  PWM 1 from 0
  PWM 2 from 0
  properly added
Fan from IT8712F-I@$290(onISA@$290) -->
  Fan1
  properly added
Fan from IT8712F-I@$290(onISA@$290) -->
  Fan2
  properly added
Fan from IT8712F-I@$290(onISA@$290) -->
  Fan3
  properly added
Fan from IT8712F-I@$290(onISA@$290) -->
  Fan4
  properly added
Fan from IT8712F-I@$290(onISA@$290) -->
  Fan5
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  Vcore1
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  Vcore2
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  +3.3V
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  +5V
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  +12V
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  -12V
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  -5V
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  +5V
  properly added
Volt from IT8712F-I@$290(onISA@$290) -->
  Vbat
  properly added
Loaded 0 events
Preparing report...
SMBus msg : SMB Error $49 : Busy (1A)
SpeedFanReport.TXT (59,001 bytes)   

mdcobra

2007-12-09 13:32

reporter   ~0003208

Probably caused by : speedfan.sys ( speedfan+d00 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: bf8c2396, The address that the exception occurred at
Arg3: b4716514, Trap Frame
Arg4: 00000000

Debugging Details:
------------------

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************

FAULTING_MODULE: 804d7000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 4516880f

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP:
win32k+c2396
bf8c2396 668b38 mov di,word ptr [eax]

TRAP_FRAME: b4716514 -- (.trap 0xffffffffb4716514)
ErrCode = 00000000
eax=4000005a ebx=02f20040 ecx=02f20040 edx=00000008 esi=00000002 edi=4000005a
eip=bf8c2396 esp=b4716588 ebp=b4716594 iopl=0 nv up ei pl nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010202
win32k+0xc2396:
bf8c2396 668b38 mov di,word ptr [eax] ds:0023:4000005a=????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

BUGCHECK_STR: 0x8E

LAST_CONTROL_TRANSFER: from bf836fdf to bf8c2396

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
b4716594 bf836fdf 02f20040 4000005a 000005d8 win32k+0xc2396
b47165b8 bf836ce0 00000166 b471681c e2d35dd0 win32k+0x36fdf
b47167cc bf80a517 e2d35de0 00000000 00000000 win32k+0x36ce0
b4716860 805409ac e2d35dd0 e1a7f418 e26c1350 win32k+0xa517
b4716894 7c90eb94 badb0d00 0012f078 00000000 nt+0x699ac
b4716898 badb0d00 0012f078 00000000 00000000 0x7c90eb94
b471689c 0012f078 00000000 00000000 00000000 speedfan+0xd00
b47168a0 00000000 00000000 00000000 00000000 0x12f078


STACK_COMMAND: kb

FOLLOWUP_IP:
speedfan+d00
badb0d00 ?? ???

SYMBOL_STACK_INDEX: 6

SYMBOL_NAME: speedfan+d00

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: speedfan

IMAGE_NAME: speedfan.sys

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner
---------

mdcobra

2007-12-09 13:33

reporter   ~0003209

Probably caused by : speedfan.sys ( speedfan+d00 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: f0ff1f2c, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 80510d95, address which referenced memory

Debugging Details:
------------------

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************

FAULTING_MODULE: 804d7000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 4516880f

READ_ADDRESS: unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPoolCodeStart
unable to get nt!MmPoolCodeEnd
 f0ff1f2c

CURRENT_IRQL: 2

FAULTING_IP:
nt+39d95
80510d95 8b460c mov eax,dword ptr [esi+0Ch]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

BUGCHECK_STR: 0xA

LAST_CONTROL_TRANSFER: from 805aee11 to 80510d95

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
b46d5c14 805aee11 776ad001 88dfada0 007ffff8 nt+0x39d95
b46d5c34 8051295d 88dfada0 88e14a5c 88dfada0 nt+0xd7e11
b46d5c68 805d114b 00dfada0 892fd890 40010004 nt+0x3b95d
b46d5cf0 805d122f 40010004 b46d5d4c 804fef8d nt+0xfa14b
b46d5cfc 804fef8d 892fd890 b46d5d48 b46d5d3c nt+0xfa22f
b46d5d4c 80540b9e 00000001 00000000 b46d5d64 nt+0x27f8d
b46d5d64 7c90eb94 badb0d00 0007f460 00000000 nt+0x69b9e
b46d5d68 badb0d00 0007f460 00000000 00000000 0x7c90eb94
b46d5d6c 0007f460 00000000 00000000 00000000 speedfan+0xd00
b46d5d70 00000000 00000000 00000000 00000000 0x7f460


STACK_COMMAND: kb

FOLLOWUP_IP:
speedfan+d00
badb0d00 ?? ???

SYMBOL_STACK_INDEX: 8

SYMBOL_NAME: speedfan+d00

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: speedfan

IMAGE_NAME: speedfan.sys

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner
---------

mdcobra

2007-12-09 13:34

reporter   ~0003210

Probably caused by : hardware ( speedfan+d00 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: b4f48278, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: bf8cfa46, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)

Debugging Details:
------------------

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************

FAULTING_MODULE: 804d7000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

READ_ADDRESS: unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPoolCodeStart
unable to get nt!MmPoolCodeEnd
 b4f48278

FAULTING_IP:
win32k+cfa46
bf8cfa46 8b8da8298721 mov ecx,dword ptr [ebp+218729A8h]

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: DRIVER_FAULT

BUGCHECK_STR: 0x50

MISALIGNED_IP:
win32k+cfa46
bf8cfa46 8b8da8298721 mov ecx,dword ptr [ebp+218729A8h]

LAST_CONTROL_TRANSFER: from 805409ac to bf8cfa46

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
936d58d0 805409ac 0004037e 0000000e 00000000 win32k+0xcfa46
936d58f4 7c90eb94 badb0d00 0012ebec 00000000 nt+0x699ac
936d58f8 badb0d00 0012ebec 00000000 00000000 0x7c90eb94
936d58fc 0012ebec 00000000 00000000 00000001 speedfan+0xd00
936d5900 00000000 00000000 00000001 00000038 0x12ebec


STACK_COMMAND: kb

FOLLOWUP_IP:
speedfan+d00
badb0d00 ?? ???

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: speedfan+d00

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

FAILURE_BUCKET_ID: IP_MISALIGNED

BUCKET_ID: IP_MISALIGNED

Followup: MachineOwner
---------

Issue History

Date Modified Username Field Change
2007-12-09 13:31 mdcobra New Issue
2007-12-09 13:31 mdcobra Status new => assigned
2007-12-09 13:31 mdcobra Assigned To => alfredo
2007-12-09 13:31 mdcobra File Added: SpeedFanReport.TXT
2007-12-09 13:31 mdcobra Video Card Model => 2*7900 GT in SLI (1 Sparcle and 1 Leadtek)
2007-12-09 13:32 mdcobra Note Added: 0003208
2007-12-09 13:33 mdcobra Note Added: 0003209
2007-12-09 13:34 mdcobra Note Added: 0003210