Almico's Bug Tracker

View Issue Details Jump to Notes ] Issue History ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0002454SpeedFanFan controlpublic2015-11-06 04:112019-01-09 07:15
Assigned Toalfredo 
PlatformOSMicrosoft Windows 10OS VersionWindows 10 Pro
Product Version4.52 beta 
Target VersionFixed in Version 
Summary0002454: Z170 Maximus Hero VIII No control over Fan speeds
DescriptionAll fans are now detectable except for the water pump, which is not imperative. I can find my motherboard in the configure tab and change all fans from Smart Fan IV to manual.

After changing I then attempt to add fan curves within the fan control tab. I choose Core0 as my core temps are represented accurately. I then can change the curve and run Prime95. The fans will all spike immediately to 100% during the torture test regardless of the fan curve I set. So no matter what the upper limit of the curve is, the fans will go to 100%.
Additional InformationI have tested every possible setting and even removed Fan Xpert 3, and changed fan bios settings and the issue remains.
TagsNo tags attached.
Motherboard ModelMaximus Hero VIII Z170
Video Card ModelGTX 980Ti
Attached Files

- Relationships

-  Notes
MaxusR (reporter)
2015-11-06 15:35

Don't forget about the "Warning" values in the Configure - Temperatures tab.
walshcm (reporter)
2015-11-06 21:13

Thanks MaxusR. The only setting I did not touch was the warning values. I went in and changed them to 99 as I do not want my fan speeds based on that and after once again messing with the bios and disabling fan xpert3 service I appear to have control as intended.

Probably would be a good thing to add a disable button on the "warning" values feature under temperatures. Can I close this ticket or does Alfredo have to?
Himanshu0709 (reporter)
2019-01-09 07:15

Control panel is one of the most useful program of all PC where people were able to access the program settings so just from here [^] you will get the tutorial to open control panel in windows 10 pc in easiest way.

- Issue History
Date Modified Username Field Change
2015-11-06 04:11 walshcm New Issue
2015-11-06 04:11 walshcm Status new => assigned
2015-11-06 04:11 walshcm Assigned To => alfredo
2015-11-06 15:35 MaxusR Note Added: 0007918
2015-11-06 21:13 walshcm Note Added: 0007919
2019-01-09 07:15 Himanshu0709 Note Added: 0008771

Copyright © 2000 - 2019 MantisBT Team
Time: 0.1106 seconds.
memory usage: 8,056 KB
Powered by Mantis Bugtracker